How to Install a MAP Sensor in the Intake Manifold on 2007 Jeep Liberty?

An O-ring is used to attach the Manifold Absolute Pressure (MAP) sensor into the front of the intake manifold, forming a seal. To begin, wipe the opening where the MAP sensor goes at the intake manifold and check that the O-ring seal is whole. Put the sensor in the manifold and install the MAP sensor's bolts (screws), tightening them with 3 Nm (25 in. lbs.) torque. After that, complete the connection by plugging in the electrical connector.

OEM 2007 Jeep Liberty MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2007 Jeep Liberty M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS

2007 Jeep Liberty MAP Sensor Parts and Q&A

Q: How to Install a MAP Sensor in the Intake Manifold on 2007 Jeep Liberty?
A: An O-ring is used to attach the Manifold Absolute Pressure (MAP) sensor into the front of the intake manifold, forming a seal. To begin, wipe the opening where the MAP sensor goes at the intake manifold and check that the O-ring seal is whole. Put the sensor in the manifold and install the MAP sensor's bolts (screws), tightening them with 3 Nm (25 in. lbs.) torque. After that, complete the connection by plugging in the electrical connector.