Other Name: Seat Belt - Rear Center Shoulder; Seat Belt Lap and Shoulder Belt, Rear Center; Center Seat Belt; Seat Belt Rear Counter Shoulder; Seat Belt Rear Center Shoulder
Position: Rear Center
Replaces: 5KJ72XDHAB, 5KJ721DVAB, 5KJ721DVAA
Item Weight: 2.10 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 5KJ721DVAC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
Other Name: Seat Belt - Rear Center Shoulder; Seat Belt Lap and Shoulder Belt, Rear Center; Center Seat Belt; Seat Belt Rear Counter Shoulder; Seat Belt Rear Center Shoulder
Other Name: Seatbelt - Front Inner; Seat Belt Receptacle, Front Left Inner; Latch; Seat Belt Front Inner
Position: Front Inner Driver Side
Item Weight: 1.90 Pounds
Item Dimensions: 11.7 x 9.9 x 2.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5KJ651K7AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
2008 Jeep Liberty Seat Belt Parts and Q&A
Q: How to Maintain the Second Row Center Seat Belt on 2008 Jeep Liberty?
A: Start by checking the second row center belt's seat belt, buckle, mounting hardware, retractor, tether strap and anchor for proper fit. If a belt is torn, frayed or cut, replace it. If the buckle, retractor, latch plate or anchor is bent or damaged, replace it. All bent or damaged child restraint anchors should be changed and never repaired; always get new and clean replacement items from the Mopar(R) Parts catalog. Fasten the second row center belt and retractor unit to the 60 percent seat back by aligning the tab on the frame with the keyed hole in the panel. Fix the retractor to the back of the seat by screwing it in to a tightness of 55 Nm (41 ft. lbs.). After removing the foam, trim cover and bezel, stick them onto the back panel once more, checking that the seat belt does not twist between the retractor and bezel as you place them. Install the entire second row seat as one unit and then place the left second row seat belt buckle and center seat belt lower anchor unit onto the rear floor panel.