How to Install the Wheelhouse Rear Splash Shield on 2008 Jeep Liberty?

Put the wheel house liner into place over the wheel house opening to start installation of the rear wheelhouse splash shield. After that, secure the wheel house liner with four push pins. After that, secure the sill plate molding and wheel house liner to the body with two push pins. In the end, put in place the rear wheel flare molding.

OEM 2008 Jeep Liberty Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wheelhouses found

View related parts
2008 Jeep Liberty Wheelhouse Liner, Rear Passenger Side Part Number: 55157412AB
$63.05 MSRP: $92.80
You Save: $29.75 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Fender Side; Quarter Panel Splash Shield, Rear Right; Liner Fender Side
- Position: Rear Passenger Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 27.5 x 10.3 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55157412AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Wheelhouse Liner, Rear Driver Side Part Number: 55157413AB
$96.49
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Fender Side; Quarter Panel Splash Shield, Rear Left; Liner Fender Side
- Position: Rear Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 48.9 x 19.2 x 12.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55157413AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Fender Liner, Front Driver Side Part Number: 55157411AD
$72.91 MSRP: $108.00
You Save: $35.09 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Front Fender; Fender Splash Shield, Front Left; Liner Front Fender; Fender Splash Shield
- Position: Front Driver Side
- Replaces: 55157411AC
- Item Weight: 1.90 Pounds
- Item Dimensions: 30.0 x 26.7 x 16.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55157411AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Fender Liner, Front Passenger Side Part Number: 55157410AD
$72.91 MSRP: $108.00
You Save: $35.09 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Front Fender; Fender Splash Shield, Front Right; Liner Front Fender; Fender Splash Shield
- Position: Front Passenger Side
- Replaces: 55157410AC
- Item Weight: 1.90 Pounds
- Item Dimensions: 29.7 x 25.7 x 17.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55157410AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS

2008 Jeep Liberty Wheelhouse Parts and Q&A

Q: How to Install the Wheelhouse Rear Splash Shield on 2008 Jeep Liberty?
A: Put the wheel house liner into place over the wheel house opening to start installation of the rear wheelhouse splash shield. After that, secure the wheel house liner with four push pins. After that, secure the sill plate molding and wheel house liner to the body with two push pins. In the end, put in place the rear wheel flare molding.