How to Remove the MAP Sensor from the Upper Intake Manifold on 2007 Jeep Wrangler?

MAAP sensor is attached to the back of the upper intake manifold. To remove, unattached its electrical connector, cleaned dirty of the sensor base, pulled up and then turned the sensor a 1/4 turn counterclockwise to remove it. Lastly, check the O-ring of the sensor.

OEM 2007 Jeep Wrangler MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2007 Jeep Wrangler M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 6.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS

2007 Jeep Wrangler MAP Sensor Parts and Q&A

Q: How to Remove the MAP Sensor from the Upper Intake Manifold on 2007 Jeep Wrangler?
A: MAAP sensor is attached to the back of the upper intake manifold. To remove, unattached its electrical connector, cleaned dirty of the sensor base, pulled up and then turned the sensor a 1/4 turn counterclockwise to remove it. Lastly, check the O-ring of the sensor.