How to Service and Repair a Rear Wheel Stud on 2008 Jeep Wrangler?

Install the new rear wheel stud first by putting it into the hub flange while rotating it between the hub/bearing and the park brake shoes. After that, add three washers to the stud and put the lug nut on top of them with the flat side facing out. Tighten the lug nut after the stud starts being pulled into the hub flange and then make sure the stud is properly seated. After you've removed the lug nut and washers, put the brake rotor and caliper into place. After that, fit the wheel and tire with new lug nuts to the replaced studs and then remove the support to lower the vehicle.

OEM 2008 Jeep Wrangler Wheel Stud

Rim Wheel Stud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Studs found

View related parts
2008 Jeep Wrangler Wheel Stud, Front Part Number: 68003282AA
$10.04 MSRP: $14.75
You Save: $4.71 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt - Hub; Wheel Lug Stud, Front; Wheel Stud, 1/2-20; Wheel Bolt; Stud; Stud Hub; Wheel Lug Stud
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.1 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003282AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2008 Jeep Wrangler Fender Bolt, Front Part Number: 6105096AA
$5.99 MSRP: $8.80
You Save: $2.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screw-Hex Head; Susp. Ride Ht Sensor Bolt; Exh. Manifold Heat Shield Bolt; Axle Hub Mtg Bolt; Hub Assembly Bolt, Fender Screw, Shield Screw, Splash Shield Screw, Headlamp Assembly Screw.
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.8 x 0.8 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6105096AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2008 Jeep Wrangler Wheel Stud Parts and Q&A

Q: How to Service and Repair a Rear Wheel Stud on 2008 Jeep Wrangler?
A: Install the new rear wheel stud first by putting it into the hub flange while rotating it between the hub/bearing and the park brake shoes. After that, add three washers to the stud and put the lug nut on top of them with the flat side facing out. Tighten the lug nut after the stud starts being pulled into the hub flange and then make sure the stud is properly seated. After you've removed the lug nut and washers, put the brake rotor and caliper into place. After that, fit the wheel and tire with new lug nuts to the replaced studs and then remove the support to lower the vehicle.