How to Install and Reprogram an ABS Control Module on 2008 Jeep Wrangler?

You should reprogram the Electronic Brake Control Module (ABM) using the scan tool if it is being replaced. Put the ABM on the Hydraulic Control Unit (HCU) and tighten the screws up to 2 Nm (16 in. lbs.). You should then install the HCU/ABM assembly to the mounting studs by securing it with two mounting nuts and a bolt, tighten them to 11.5 Nm (102 in. lbs.). Screw the brake lines onto the HCU and tighten them using a torque wrench to 19 Nm (170 in. lbs.). Attach the fitting on the wiring harness to the ABM and press down on the release to lock it in place. After that, install the master cylinder and then link the master cylinder serpentine belt to its sprocket. Next, bleed all the ABS brake lines after finishing the installation.

OEM 2008 Jeep Wrangler ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2008 Jeep Wrangler Control Module Part Number: 68030935AA
$626.54 MSRP: $945.00
You Save: $318.46 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; Modulator Valve; Modulator; Control Unit Anti-Lock Brake
- Item Weight: 6.40 Pounds
- Item Dimensions: 7.4 x 7.4 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68030935AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
- Rubicon, Sahara, Unlimited Rubicon, Unlimited Sahara, Unlimited X, X | 6 Cyl 3.8 L GAS
View related parts
2008 Jeep Wrangler Control Module Part Number: 68030936AB
$555.33 MSRP: $814.00
You Save: $258.67 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module; Hydraulic Unit; Module Anti-Lock Brake System
- Replaces: 68030936AA
- Item Weight: 2.80 Pounds
- Item Dimensions: 6.4 x 7.1 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68030936AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
- Rubicon, Sahara, Unlimited Rubicon, Unlimited Sahara, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS

2008 Jeep Wrangler ABS Control Module Parts and Q&A

Q: How to Install and Reprogram an ABS Control Module on 2008 Jeep Wrangler?
A: You should reprogram the Electronic Brake Control Module (ABM) using the scan tool if it is being replaced. Put the ABM on the Hydraulic Control Unit (HCU) and tighten the screws up to 2 Nm (16 in. lbs.). You should then install the HCU/ABM assembly to the mounting studs by securing it with two mounting nuts and a bolt, tighten them to 11.5 Nm (102 in. lbs.). Screw the brake lines onto the HCU and tighten them using a torque wrench to 19 Nm (170 in. lbs.). Attach the fitting on the wiring harness to the ABM and press down on the release to lock it in place. After that, install the master cylinder and then link the master cylinder serpentine belt to its sprocket. Next, bleed all the ABS brake lines after finishing the installation.