Other Name: Actuator - A/C And Heater; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator; Servo; A/C and Heater Actuator with Bracket, Lever, and Recirculation Door.
Item Weight: 0.70 Pounds
Item Dimensions: 1.9 x 3.6 x 4.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4885206AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
2009 Chrysler Aspen Blend Door Actuator Parts and Q&A
Q: How to Service and Repair a Blend Door Actuator Safely for Front on 2009 Chrysler Aspen?
A: To service the air door actuator/motor, remove the negative cable from the battery, wait for two minutes so the capacitor can drain, then remove the air bag system's fuse. Take out the five screws that attach the panel door actuator and the floor/defrost door actuator at the driver side end of the HVAC housing. After that, unplug the HVAC wire harness connector from the panel door actuator and the floor/defrost door actuator as necessary. Once done, take away the mode door actuator(s) from the HVAC housing.