OEM 2009 Chrysler PT Cruiser Alternator

Generator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Alternators found

  • 2009 Chrysler PT Cruiser Alternator Diagram - 5033343AA
    View related parts
    Product Specifications
    • Other Name: Alternator - Engine; Alternators; Generator Engine
    • Item Weight: 12.30 Pounds
    • Item Dimensions: 10.4 x 10.2 x 10.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5033343AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Chrysler PT Cruiser Submodels:
    • Base, Classic, Couture Edition, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
  • 2009 Chrysler PT Cruiser Alternator - 5034702AA
    2009 Chrysler PT Cruiser Alternator Diagram - 5034702AA
    View related parts
    Product Specifications
    • Other Name: Alternator - Engine; Alternators; Generator Engine
    • Item Weight: 14.40 Pounds
    • Item Dimensions: 10.8 x 9.9 x 10.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5034702AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Chrysler PT Cruiser Submodels:
    • Base, GT, Limited, Touring | 4 Cyl 2.4 L GAS

2009 Chrysler PT Cruiser Alternator Parts and Q&A

  • Q: How to Effectively Service and Repair an Alternator on 2009 Chrysler PT Cruiser?
    A: Both the air cleaner lid, inlet air sensor and air hose should be taken off together with the battery's negative cable before you do anything else. Unscrew the generator T-bolt nut a bit, then lift the vehicle on a hoist to see the rear end. Slide off the front right wheel and accessory drive splash shield and remove the pencil strut after that. Lose the nuts from both the lower pivot bolt and the T-bolt on the accessory drive belt. Disconnect the field circuit from the generator, then take out the two terminals on the B+ terminal. After that, take out the generator belt and the axle shaft. Before removing the generator, get rid of the lower mounting bolt and nut from the upper T-bolt.

Related 2009 Chrysler PT Cruiser Parts