OEM 2009 Chrysler PT Cruiser Washer Reservoir

2009 Chrysler PT Cruiser Washer Reservoir Parts and Q&A

• Q: How to Install a Washer Reservoir on 2009 Chrysler PT Cruiser?

  A: Pump the washer hose into the pump grommet, put the plastic strap over the assembly and push it securely into the reservoir. After that, place the reservoir in the cowl section and hook up the washer hoses, making sure the hose with the white stripe goes to the white part of the pump and the black hose to the black part. Attach the pump wire connector and after that, install the three reservoir retaining screws and tighten them to 8 Nm (70 in. lbs.). Insert the right side cowl cover so that the left side cover overlaps and place the four retainers, then put the rear engine seal at the cowl in last. Turn on the wipers before attaching the wiper arms so that they stop at the PARK position, then place the driver's wiper arm so its tip and the passenger's arm middle are even with the park line on the windshield. First, ensure the arm is over/centered as you set it on the pivot and tighten the wiper arm retaining nut correctly. Lastly, fasten the negative battery cable, close the hood and check that the vehicle and all systems are working correctly.