How to Remove the Washer Reservoir on Chrysler PT Cruiser?

Open the hood and remove the negative battery cable before getting rid of the windshield washer reservoir. To do this, lift up the wiper arm nut cap with a trim stick (#C-4755) or an equivalent tool and then unscrew and take the wiper arm retaining nut off. While positioned outside the center, wiggle the arm around in its pivot until it removes. After that, remove the right cowl cover which is above the left cover, by removing the rear seal at the cowl and the four push retainers attached to it. After the first step, take out all three reservoir retaining screws, separate the pump cable and remove the connections from the washer hose. Remove the reservoir from inside the cowl and let it drain into a bucket below. Move the washer pump into the new reservoir, as it will be supplied with a grommet for the pump. After that, take out the plastic strap around the pump and gently pull the pump out of the reservoir by the grommet.

OEM Chrysler PT Cruiser Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Reservoir found

View related parts
Chrysler PT Cruiser Washer Reservoir Part Number: 5018059AB
Product Specifications
- Other Name: Reservoir - Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir; Reservoir Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

Chrysler PT Cruiser Washer Reservoir

Choose OEM Washer Reservoir that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Washer Reservoir follows strict manufacturing steps to lock in quality and fit. If your Chrysler PT Cruiser matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine PT Cruiser parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

For the Charger and the Aspen, the Chrysler PT Cruiser Washer Reservoir is a critical part with large added value for the Chrysler PT Cruiser. Used to store windshield washer fluid, this Washer Reservoir helps the driver to have proper visibility on the road as visibility is vital for any driver. Made of hard black plastic, the Chrysler PT Cruiser Washer Reservoir is located in the engine compartment although the house might be slightly different on different models of Chrysler PT Cruiser. This versatility goes hand in hand with the compatibility that the company has with with all sorts of versions of PT Cruiser so that all the users benefitted from its usefulness. This concept shows that, the Washer Reservoir has to be maintained frequently because the plastic tends to become brittle therefore in the case of low levels of the fluid, it becomes vulnerable. The willingness of the Washer Reservoir should enhance efficiency and safety on the road according to the paper. In terms of the automotive market, the Chrysler PT Cruiser Washer Reservoir is rather unique as it plays a part in the functional utility of the car as well as in the experience of driving one. As the Chrysler PT Cruiser has been manufactured with more than a million units, it has become famous for its distinct design and manufacturing features; thus, the Washer Reservoir plays an essential role in ensuring that drivers have the most suitable conditions for their car. In conclusion this Chrysler PT Washer Reservoir proves this commitment of Chrysler in creating and offering high quality equipments to its users to guarantee that every Chrysler PT Cruiser would continually be a safe car for every owner.

Chrysler PT Cruiser Washer Reservoir Parts and Q&A

Washer Reservoir
5018059AB
Q: How to Remove the Washer Reservoir on Chrysler PT Cruiser?
A:
Open the hood and remove the negative Battery Cable before getting rid of the windshield washer reservoir. To do this, lift up the Wiper Arm nut cap with a trim stick (#C-4755) or an equivalent tool and then unscrew and take the wiper arm retaining nut off. While positioned outside the center, wiggle the arm around in its pivot until it removes. After that, remove the right cowl cover which is above the left cover, by removing the rear seal at the cowl and the four push retainers attached to it. After the first step, take out all three reservoir retaining screws, separate the pump cable and remove the connections from the washer hose. Remove the reservoir from inside the cowl and let it drain into a bucket below. Move the Washer Pump into the new reservoir, as it will be supplied with a grommet for the pump. After that, take out the plastic strap around the pump and gently pull the pump out of the reservoir by the grommet.