How to Install an HVAC Pressure Switch on 2009 Chrysler Sebring?

To put the HVAC pressure switch in place, clean and lubricate a rubber O-ring 4 and fit it tightly around the HVAC discharge line 3. Then, fix the HVAC pressure switch 2 to the HVAC discharge line and tighten it securely. Afterward, attach wire harness connector 1 to the HVAC pressure switch. In the end, attach the negative battery cable back to its position. The compressor tube for R-134a works best with the correct oil as well as the right O-ring.

OEM 2009 Chrysler Sebring HVAC Pressure Switch

Air Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 HVAC Pressure Switches found

View related parts
2009 Chrysler Sebring Check Valve, Rear Part Number: 5003862AA
$4.62 MSRP: $6.95
You Save: $2.33 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High Side Adapter; Valve Core; Compressor Cut-Out; HVAC Switch; Trinary Switch; Pressure Switch; Fill Valve; Suction, Liquid, Discharge Line Valves; A/C Check Valve Core.
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 0.8 x 0.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5003862AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler Sebring Check Valve Part Number: 68049091AA
$36.99 MSRP: $74.85
You Save: $37.86 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High & Low Side Charging Adapters; Service Valve Core.; Fill Valve; Line Valve; Liquid Line Valve; Cap; Valve Core A/C Line
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.0 x 0.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68049091AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler Sebring Pressure Switch Part Number: 5174039AB
$118.97 MSRP: $175.00
You Save: $56.03 (33%)
Product Specifications
- Other Name: Valve - A/C Pressure Transducer; Refrigerant, HVAC, Compressor, Trinary Switches; Pressure Transducer; Includes O-Ring and Item #4; Discharge Line Valve.
- Replaces: 5175684AA, 5189363AA, 5096084AA, 5174039AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.1 x 1.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174039AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Chrysler Sebring HVAC Pressure Switch Parts and Q&A

Q: How to Install an HVAC Pressure Switch on 2009 Chrysler Sebring?
A: To put the HVAC pressure switch in place, clean and lubricate a rubber O-ring 4 and fit it tightly around the HVAC discharge line 3. Then, fix the HVAC pressure switch 2 to the HVAC discharge line and tighten it securely. Afterward, attach wire harness connector 1 to the HVAC pressure switch. In the end, attach the negative battery cable back to its position. The compressor tube for R-134a works best with the correct oil as well as the right O-ring.