How to Replace an HVAC Pressure Switch on Chrysler Sebring?

Before you replace the HVAC pressure switch, remove and separate it from the negative battery cable. After that, gently lift the top of the fascia to come to the air conditioning pressure switch. Reach inside at the point where the A/C condenser and the front fascia meet and pull out the wire harness connector from the HVAC pressure switch on the A/C discharge line. Then, take out the HVAC pressure switch from its fitting on the A/C discharge line and throw away the O-ring.

How to Service an HVAC Pressure Switch on Chrysler Sebring?

To service your HVAC pressure switch, first remove and block the negative battery cable. Then, separate the wire harness connector from the pressure switch and take out the switch from the fitting on the A/C discharge line, tossing the O-ring seal. Always use the exact O-ring recommended for R-134a and the correct refrigerant oil your A/C compressor requires. Apply a bit of clean refrigerant oil to a new O-ring and then fix it to the HVAC pressure switch fitting. After that, connect the HVAC pressure switch to the A/C discharge line by tightening it by hand. Link the wire harness plug to the HVAC pressure switch and then put the negative battery cable back in place.

OEM Chrysler Sebring HVAC Pressure Switch

Air Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 HVAC Pressure Switches found

View related parts
Chrysler Sebring Check Valve, Rear Part Number: 5003862AA
$4.62 MSRP: $6.95
You Save: $2.33 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High Side Adapter; Valve Core; Compressor Cut-Out; HVAC Switch; Trinary Switch; Pressure Switch; Fill Valve; Suction, Liquid, Discharge Line Valves; A/C Check Valve Core.
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Check Valve Part Number: 5264638
$21.34 MSRP: $31.60
You Save: $10.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; A/C High Side Charging Adapter; A/C System Valve Core; Service Valve; Suction Line Valve; Charging Valve; A/C Line Valve Core; Liquid Line Assembly
- Replaces: 68284033AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Check Valve Part Number: 5189373AA
$25.05 MSRP: $31.95
You Save: $6.90 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High & Low Side Charging Adapters; Service Valve Core.; Service Valve; Line Valve; Liquid Line Valve; Valve Core A/C Line
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Pressure Switch Part Number: 5019881AB
$117.86 MSRP: $246.00
You Save: $128.14 (53%)
ADD TO CART
Product Specifications
- Other Name: T/Ducepkg - A/C Pressure; A/C Refrigerant Pressure Sensor; HVAC Pressure Switch; Pressure Transducer; Pressure Line; Transducer; Transducer Package A/C Pressure
- Replaces: 5019881AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Check Valve Part Number: 68049091AA
$36.99 MSRP: $74.85
You Save: $37.86 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High & Low Side Charging Adapters; Service Valve Core.; Fill Valve; Line Valve; Liquid Line Valve; Cap; Valve Core A/C Line
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Pressure Switch Part Number: 5174039AB
$118.97 MSRP: $175.00
You Save: $56.03 (33%)
Product Specifications
- Other Name: Valve - A/C Pressure Transducer; Refrigerant, HVAC, Compressor, Trinary Switches; Pressure Transducer; Includes O-Ring and Item #4; Discharge Line Valve.
- Replaces: 5175684AA, 5189363AA, 5096084AA, 5174039AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler Sebring | Base, LX, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Pressure Switch Part Number: MR513123
Product Specifications
- Other Name: Switch - A/C Pressure; HVAC Safety Switch; Compressor Cut-Out; System Valve Core; Trinary Switch.; Switch A/C Pressure
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

Chrysler Sebring HVAC Pressure Switch

Choose OEM HVAC Pressure Switch that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each HVAC Pressure Switch follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A Chrysler Sebring HVAC Pressure Switch operates as an essential element which boosts both system reliability and performance in air conditioning operations. The HVAC Pressure Switch in Chrysler Sebrings maintains efficient operations through continuous pressure monitoring so the vehicle stays functional by avoiding heating or cooling failures. The HVAC Pressure Switch serves multiple Sebring models during the 1995 to 2010 production years because it follows particular operational guidelines which makes it crucial for climate control operations. Due to its configuration flexibility the Sebring HVAC Pressure Switch demonstrates its valuable role in guaranteeing peak performance across diverse Sebring sport models. This automotive market relies on the Chrysler model HVAC Pressure Switch because of its pressure-sensitive performance capabilities and its dual benefits for operational effectiveness and safety measures. The automobile's air conditioning system requires proper maintenance along with appropriate replacement timing of the HVAC Pressure Switch since this ensures optimal performance under any external condition. This reliable Chrysler car HVAC Pressure Switch positions itself as a vital driving element that performs as both a component and a core part which makes every model journey safe and comfortable for its passengers.

Chrysler Sebring HVAC Pressure Switch Parts and Q&A

Check Valve, Rear
5003862AA
Q: How to Replace an HVAC Pressure Switch on Chrysler Sebring?
A:
Before you replace the HVAC pressure switch, remove and separate it from the negative Battery Cable. After that, gently lift the top of the fascia to come to the air conditioning pressure switch. Reach inside at the point where the A/C Condenser and the front fascia meet and pull out the wire harness connector from the HVAC pressure switch on the A/C discharge line. Then, take out the HVAC pressure switch from its fitting on the A/C discharge line and throw away the O-ring.
Pressure Switch
5174039AB
Q: How to Service an HVAC Pressure Switch on Chrysler Sebring?
A:
To service your HVAC pressure switch, first remove and block the negative Battery Cable. Then, separate the wire harness connector from the pressure switch and take out the switch from the fitting on the A/C discharge line, tossing the O-ring seal. Always use the exact O-ring recommended for R-134a and the correct refrigerant oil your A/C compressor requires. Apply a bit of clean refrigerant oil to a new O-ring and then fix it to the HVAC pressure switch fitting. After that, connect the HVAC pressure switch to the A/C discharge line by tightening it by hand. Link the wire harness plug to the HVAC pressure switch and then put the negative battery cable back in place.