Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Dodge Dakota Air Bag Control Module

SRS Airbag Module
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Control Modules found

  • 2009 Dodge Dakota Air Bag Control Module - 4896176AF
    2009 Dodge Dakota Air Bag Control Module Diagram - 4896176AF
    View related parts

    2009 Dodge Dakota Passenger Discriminating Sensor Part Number: 4896176AF

    Product Specifications
    • Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit; Module Occupant Restraint
    • Replaces: 4896176AE, 4896176AD
    • Item Weight: 1.90 Pounds
    • Item Dimensions: 6.3 x 6.4 x 3.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4896176AF
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Dodge Dakota Submodels:
    • Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
  • 2009 Dodge Dakota Air Bag Control Module - 4896125AF
    2009 Dodge Dakota Air Bag Control Module Diagram - 4896125AF
    View related parts

    2009 Dodge Dakota Passenger Discriminating Sensor Part Number: 4896125AF

    Product Specifications
    • Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit; Module Occupant Restraint
    • Replaces: 4896125AE
    • Item Weight: 1.60 Pounds
    • Item Dimensions: 6.4 x 6.3 x 3.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4896125AF
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Dodge Dakota Submodels:
    • Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX

2009 Dodge Dakota Air Bag Control Module Parts and Q&A

  • Q: How to Safely Install and Connect an Air Bag Control Module on 2009 Dodge Dakota?
    A: The first step for ORC installation is to deactivate the SRS by cutting off the battery negative cable, separating it and waiting two minutes before proceeding. Put the ORC onto the studs on the ORC mount located on the floor transmission panel, making certain that the arrow on the ORC points to the front and the connector receptacles are facing the left side of the vehicle. Apply and tighten the ORC three nuts to 10 Nm (90 in. lbs.). Reconnect the harness and instrument panel cables to the ORCconnector receptacles and close all the latches andthe red CPA locks. Replace the floor duct onto the underside of the heater-air conditioner housing. Wait to link the battery negative cable until the SRS verification test has been carried out after any work done on the SRS.

Related 2009 Dodge Dakota Parts

Alternate Year Models

+
2008 Dodge Dakota Air Bag Control Module 2010 Dodge Dakota Air Bag Control Module