How to Install a MAP Sensor on 2009 Dodge Dakota?

The first step to installing the Manifold Pressure/Vacuum Sensor is to clean the mounting hole at the intake manifold. After that, make sure the MAP sensor o-ring is intact. Slide the MAP sensor over the locating pin (6) in the manifold. Attach the mounting bolt (8) and tighten it so it reaches a torque of 3 Nm (25 in. lbs.). Attach the wires to the electrical connector (2) as the last step.

OEM 2009 Dodge Dakota MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2009 Dodge Dakota M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Dakota Submodels:
- Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2009 Dodge Dakota MAP Sensor Parts and Q&A

Q: How to Install a MAP Sensor on 2009 Dodge Dakota?
A: The first step to installing the Manifold Pressure/Vacuum Sensor is to clean the mounting hole at the intake manifold. After that, make sure the MAP sensor o-ring is intact. Slide the MAP sensor over the locating pin (6) in the manifold. Attach the mounting bolt (8) and tighten it so it reaches a torque of 3 Nm (25 in. lbs.). Attach the wires to the electrical connector (2) as the last step.