How to Remove and Replace the Drive Belt on a 3.7L/4.7L Engine on 2009 Dodge Dakota?

Before doing anything else for the belt change, make sure the battery's negative cable is disconnected. After that, turn the belt tensioner 6 times until it comes in contact with the stop. When you're done, take out belt 2 and, while being careful, push the tensioner 6 back into the gun position.

OEM 2009 Dodge Dakota Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Drive Belt found

View related parts
2009 Dodge Dakota Belt - Serpentine Part Number: 68027636AB
$52.48 MSRP: $77.95
You Save: $25.47 (33%)
ADD TO CART
Product Specifications
- Other Name: BELT-SERPENTINE
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68027636AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX

2009 Dodge Dakota Drive Belt Parts and Q&A

Q: How to Remove and Replace the Drive Belt on a 3.7L/4.7L Engine on 2009 Dodge Dakota?
A: Before doing anything else for the belt change, make sure the battery's negative cable is disconnected. After that, turn the belt tensioner 6 times until it comes in contact with the stop. When you're done, take out belt 2 and, while being careful, push the tensioner 6 back into the gun position.