How to Install a Wiper Switch While Ensuring Safety on 2009 Dodge Dakota?

In order to install the multifunction switch, one will have to deactivate the SRS by unplugging the battery negative cable. Insert the switch into the housing, screw it down using two screws and replace the wire harness. Connect the bottom and the top shroud, screwing to 2 Nm. Lastly, screw the tilt steering knob and re-attach the battery.

OEM 2009 Dodge Dakota Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Switch found

View related parts
2009 Dodge Dakota Turn Signal Switch Part Number: 56049823AB
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Switch; Air Bag Clockspring.; Multifunction Switch; Switch Housing; Ignition Housing; Clockspring; Switch Multifunction
- Replaces: 56045515AA, 56049823AA, 56045165AB
- Item Weight: 1.00 Pounds
- Item Dimensions: 4.0 x 5.6 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049823AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2009 Dodge Dakota Wiper Switch Parts and Q&A

Q: How to Install a Wiper Switch While Ensuring Safety on 2009 Dodge Dakota?
A: In order to install the multifunction switch, one will have to deactivate the SRS by unplugging the battery negative cable. Insert the switch into the housing, screw it down using two screws and replace the wire harness. Connect the bottom and the top shroud, screwing to 2 Nm. Lastly, screw the tilt steering knob and re-attach the battery.