How to Install a Radiator Support on 2009 Dodge Dakota?

Installation of the radiator upper crossmember begins by fixing the outer mounting bolts. Fit and screw the latch nuts into the radiator cross member support to 31 Nm (23 ft. lbs.). Test the fit of the hood and adjust, and install the hood seal.

OEM 2009 Dodge Dakota Radiator Support

Center Radiator Support

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Radiator Supports found

View related parts
2009 Dodge Dakota Side Rail, Front Driver Side Part Number: 55359645AC
Product Specifications
- Other Name: Housing - Radiator; Fender Rail, Front Left; Side Rail Assembly; Closure Radiator
- Position: Front Driver Side
- Replaces: 55359645AB
- Item Weight: 17.60 Pounds
- Item Dimensions: 50.0 x 19.1 x 16.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55359645AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2009 Dodge Dakota Side Rail, Front Passenger Side Part Number: 55359644AC
Product Specifications
- Other Name: Housing - Radiator; Fender Rail, Front Right; Side Rail Assembly; Closure Radiator
- Position: Front Passenger Side
- Replaces: 55359644AB
- Item Weight: 25.50 Pounds
- Item Dimensions: 47.8 x 26.3 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55359644AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2009 Dodge Dakota Radiator Support Parts and Q&A

Q: How to Install a Radiator Support on 2009 Dodge Dakota?
A: Installation of the radiator upper crossmember begins by fixing the outer mounting bolts. Fit and screw the latch nuts into the radiator cross member support to 31 Nm (23 ft. lbs.). Test the fit of the hood and adjust, and install the hood seal.