Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Rear; Resistor; Resistor Blower Motor
Position: Rear
Item Weight: 0.80 Pounds
Item Dimensions: 7.5 x 6.1 x 5.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5019639AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Front; HVAC Blower Motor Regulator; Resistor Blower Motor; HVAC Blower Motor Resistor; Blower Motor Resistor
Position: Front
Replaces: 4885635AC, 5174618AA
Item Weight: 0.60 Pounds
Item Dimensions: 2.6 x 3.5 x 3.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5061575AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
2009 Dodge Durango Blower Motor Resistor Parts and Q&A
Q: How to Service the Rear Blower Motor Resistor on 2009 Dodge Durango?
A: Before servicing the blower motor resistor at the rear, disconnect and isolate the negative battery cable. After that, take the quarter interior trim panel out from the right rear. After that, separate the rear heater-A/C wire harness connector (4) from the rear blower motor resistor (1). Afterwards, take out the screw (3) fastening the rear blower motor resistor to the rear heater-A/C housing (2). After that, take out the rear blower motor resistor from the rear heater-A/C housing and discard it.