JeepParts
My Garage
My Account
Cart
OEM 2009 Dodge Durango Heater Core
HVAC Heater Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Heater Cores found
2009 Dodge Durango Heater Core, Front Part Number: 5166114AB
$218.99 MSRP: $330.00You Save: $111.01 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Heater; HVAC Heater Core, Front; Core Heater Includes: Tubes, O - Rings, Seals, Clamps; Core Heater With Tubes And Seal; HVAC Heater Core
- Position: Front
- Replaces: 5166114AA
- Item Weight: 2.90 Pounds
- Item Dimensions: 22.7 x 11.0 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5166114AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2009 Dodge Durango Heater Core, Rear Part Number: 68046006AA
Product Specifications- Other Name: Core - Heater; HVAC Heater Core, Rear; Core Heater Includes: Plate, Screw
- Position: Rear
- Item Weight: 1.10 Pounds
- Item Dimensions: 17.0 x 12.2 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68046006AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2009 Dodge Durango Heater Core Parts and Q&A
- Q: How to Remove the Rear Heater Core on 2009 Dodge Durango?A: Before removing the rear heater core, you should first cut power to the battery by removing its negative cable. After that, take out the rear heater-A/C housing. A deformed or damaged seal should be replaced as soon as possible. Remove the foam seal from the rear heater core tube and the evaporator line flange one at a time. Take out the screw that holds the rear heater core tube and evaporator line flange to the side of the rear heater-A/C housing that faces outboard. Pull up on the retaining tab that holds the rear heater core tube and evaporator line flange in place on the rear heater-A/C housing, then take off the flange. After that, unscrew the rear heater core retaining bracket from the rear heater-A/C housing and remove the bracket. A damaged or deformed seal around the heater core must be changed. Pull the rear heater core carefully from the inboard section of the rear heater-A/C housing.
Related 2009 Dodge Durango Parts
2009 Dodge Durango Blower Motor
2009 Dodge Durango Blend Door Actuator
2009 Dodge Durango Blower Motor Resistor
2009 Dodge Durango A/C Accumulator
2009 Dodge Durango A/C Clutch
2009 Dodge Durango A/C Compressor
2009 Dodge Durango A/C Expansion Valve
2009 Dodge Durango A/C Hose
2009 Dodge Durango A/C Service Cap
2009 Dodge Durango A/C Switch
2009 Dodge Durango Blower Control Switches
2009 Dodge Durango HVAC Pressure Switch