How to Install a Yaw Sensor and Complete the Associated Steps on 2009 Dodge Journey?

To install the yaw sensor, position the sensor over the floor pan tunnel studs and secure with two nuts with 9 Nm (80 in. lbs.). Connect wiring harness, put lower instrument panel trim on, re-connect battery negative cable, do Verification Test to clear faults.

OEM 2009 Dodge Journey Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Yaw Sensors found

View related parts
2009 Dodge Journey Yaw Rate Sensor Part Number: 56029482AA
$202.81 MSRP: $301.00
You Save: $98.19 (33%)
ADD TO CART
Product Specifications
- Other Name: Module - Dynamics; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.1 x 4.1 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029482AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Journey Submodels:
- R/T, SXT | 6 Cyl 3.5 L GAS
View related parts
2009 Dodge Journey Yaw Rate Sensor Part Number: 56029429AA
Product Specifications
- Other Name: Sensor - Dynamics; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Item Weight: 1.40 Pounds
- Item Dimensions: 6.5 x 6.5 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029429AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Journey Submodels:
- R/T, SXT | 6 Cyl 3.5 L GAS

2009 Dodge Journey Yaw Sensor Parts and Q&A

Q: How to Install a Yaw Sensor and Complete the Associated Steps on 2009 Dodge Journey?
A: To install the yaw sensor, position the sensor over the floor pan tunnel studs and secure with two nuts with 9 Nm (80 in. lbs.). Connect wiring harness, put lower instrument panel trim on, re-connect battery negative cable, do Verification Test to clear faults.