How to Install an Intermediate Shaft on 2009 Dodge Viper?

To install the intermediate shaft, position the intermediate shaft as per the removal procedure. Align and slide coupling on extension and steering gear shaft, install and tighten pinch bolts, 49 Nm (36 ft. lbs.). Finally, reinstall the air cleaner housing, remove the steering wheel holder and reconnect the battery negative cable.

OEM 2009 Dodge Viper Intermediate Shaft

Steering Column Intermediate Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intermediate Shafts found

View related parts
2009 Dodge Viper Axle Shafts Part Number: 68027872AC
$228.87 MSRP: $282.00
You Save: $53.13 (19%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Axle Intermediate; Axle Shaft; Shaft Axle Intermediate
- Replaces: 68027872AB, 68027873AA
- Item Weight: 3.80 Pounds
- Item Dimensions: 12.3 x 4.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68027872AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Axle Shafts Part Number: 68027873AC
Product Specifications
- Other Name: Shaft - Axle Intermediate; Axle Shaft; Shaft Axle Intermediate
- Replaces: 68027873AB, 68027872AA
- Item Weight: 2.70 Pounds
- Item Dimensions: 5.2 x 5.2 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68027873AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS

2009 Dodge Viper Intermediate Shaft Parts and Q&A

Q: How to Install an Intermediate Shaft on 2009 Dodge Viper?
A: To install the intermediate shaft, position the intermediate shaft as per the removal procedure. Align and slide coupling on extension and steering gear shaft, install and tighten pinch bolts, 49 Nm (36 ft. lbs.). Finally, reinstall the air cleaner housing, remove the steering wheel holder and reconnect the battery negative cable.