OEM 2009 Dodge Viper Sway Bar Bushing

2009 Dodge Viper Sway Bar Bushing Parts and Q&A

• Q: How to Install Sway Bar Bushing for Rear Suspension on 2009 Dodge Viper?

  A: Before putting in the rear suspension sway bar bushings, clean the sway bar carefully in the part where the bushings will go. After that, take the bushing out of its plastic wrapper, slip it around the sway bar and line it up with the retainer ring. Cover each bushing with a bushing retainer and fit them with the ends on both the frame rails. After that, put in the four retainer bolts and secure them with a tightening force of 91 Nm (67 ft. lbs.). Once completed with the other steps, place the wheel and tire on the vehicle, tighten the wheel mounting nuts one after the other in the proper sequence to 135 Nm (100 ft. lbs.). After you are done, slowly lower the vehicle back down.