How to Remove a Water Pump on 2009 Dodge Viper?

The water pump can be removed only after you have drained the entire cooling system. After that, unhook the throttle body air inlet from its hose and take out the air cleaner housing assembly. When the cover is off, pull the serpentine accessory drive belt according to the steps for removing that belt. Then, lift the water pump to get rid of the bolts loosened in the correct sequence and remove the water pump. Finally, take out and get rid of the water pump gasket.

OEM 2009 Dodge Viper Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Water Pumps found

View related parts
2009 Dodge Viper Water Pump Part Number: 5037730AA
Product Specifications
- Other Name: Pump - Water; Pump Water With Pulley; Pump Water
- Replaced by: 5037730AB
- Item Weight: 3.10 Pounds
- Item Dimensions: 10.7 x 10.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037730AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT, SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Water Pump Part Number: 5037730AB
Product Specifications
- Other Name: Pump - Water; Engine Water Pump
- Replaces: 5037730AA
- Item Weight: 4.50 Pounds
- Item Dimensions: 9.6 x 6.3 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037730AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT, SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS

2009 Dodge Viper Water Pump Parts and Q&A

Q: How to Remove a Water Pump on 2009 Dodge Viper?
A: The water pump can be removed only after you have drained the entire cooling system. After that, unhook the throttle body air inlet from its hose and take out the air cleaner housing assembly. When the cover is off, pull the serpentine accessory drive belt according to the steps for removing that belt. Then, lift the water pump to get rid of the bolts loosened in the correct sequence and remove the water pump. Finally, take out and get rid of the water pump gasket.