How to Install a Theft Security Horn on 2009 Jeep Commander?

You'll need to position the alarm siren module and the mounting bracket inside the hollow at the rear of the right side of the crossmember crossmember, to the side of the right frame rail. Screw the siren mounting bracket to the right end of the front crossmember and tighten it with 14 Nm (10 ft. lbs.). Connect the headlamp and dash wire harness back to the connector mounted above the siren. Put the horn(s) and mounting bracket back on the right side of the frame rail at the front near the outboard area. Place the vehicle onto the ground and reattach the negative battery cable. Before the VTSS works as intended, you must change the siren settings in the intrusion module using a diagnostic scan tool if a new alarm siren module has been installed.

OEM 2009 Jeep Commander Horn

Alarm Horn

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Horns found

View related parts
2009 Jeep Commander Horn Part Number: 5026994AD
$77.33 MSRP: $116.00
You Save: $38.67 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 5026994AA, 56050166AB, 56050166AC, 5026994AB
- Item Weight: 1.90 Pounds
- Item Dimensions: 5.9 x 7.0 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5026994AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Horn Switch Part Number: 68038943AA
Product Specifications
- Other Name: Horn; Horn Contact Ring; Switch Horn
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.0 x 4.1 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68038943AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Horn Parts and Q&A

Q: How to Install a Theft Security Horn on 2009 Jeep Commander?
A: You'll need to position the alarm siren module and the mounting bracket inside the hollow at the rear of the right side of the crossmember crossmember, to the side of the right frame rail. Screw the siren mounting bracket to the right end of the front crossmember and tighten it with 14 Nm (10 ft. lbs.). Connect the headlamp and dash wire harness back to the connector mounted above the siren. Put the horn(s) and mounting bracket back on the right side of the frame rail at the front near the outboard area. Place the vehicle onto the ground and reattach the negative battery cable. Before the VTSS works as intended, you must change the siren settings in the intrusion module using a diagnostic scan tool if a new alarm siren module has been installed.