Other Name: Hub & Bearing - Wheel; Rear Wheel Bearing and Hub Assembly; Repair Kit; Assembly; Bearing Kit.; Hub And Bearing Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing
Position: Rear
Replaces: 52111884AA
Item Weight: 13.20 Pounds
Item Dimensions: 8.4 x 7.5 x 7.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52111884AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2009 Jeep Commander Wheel Hub Parts and Q&A
Q: How to Service and Repair Wheel Bearings and Wheel Hubs on 2009 Jeep Commander?
A: Start by raising and supporting the vehicle, take off the wheel and tire assembly and make sure the caliper is not resting only on the hose while you work. After that, remove the disc brake caliper (1) and the brake caliper adaptor (1). After the o-ring is in the garbage (2), strip away the disc brake rotor (1). Take out the wheel speed sensor nut (2) before you remove the wheel speed sensor. Afterward, loosen and remove all three hub bearing mounting bolts from the back of the steering knuckle and take out hub bearing (3).