How to Install a Rear Door Window Regulator on 2009 Jeep Commander?

Lift the rear window regulator inside the rear door through the big access hole and connect the third connector in the harness to the regulator motor. Connect the glass into the regulator clamps and fit bolts 1 and 2 onto the regulator rails, screwing them into place so the torque reads 8.5 Nm (75 in. lbs.). Take off the door glass's anchoring tape and then attach the window switch so the glass goes to the full up position. Make sure to tighten each window regulator glass clamp at 12 Nm (105 in. lbs.) Grab the right spot for the watershield and trim panel on the door's interior. Then, mount the watershield 1 after that. Once you've finished, try using the Clear/Relearn procedure.

OEM 2009 Jeep Commander Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Window Regulators found

View related parts
2009 Jeep Commander Window Regulator, Front Driver Side Part Number: 55396481AI
$215.62 MSRP: $322.00
You Save: $106.38 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left; Regulator Front Door Window
- Position: Front Driver Side
- Replaces: 55396481AG, 55396481AH, 55396481AF
- Item Weight: 5.90 Pounds
- Item Dimensions: 32.8 x 25.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396481AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Window Regulator, Rear Passenger Side Part Number: 55396482AF
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Right
- Position: Rear Passenger Side
- Replaces: 55396482AB, 55396482AC, 55396482AD
- Item Weight: 4.50 Pounds
- Item Dimensions: 28.9 x 15.9 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396482AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Window Regulator, Rear Driver Side Part Number: 55396483AF
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Left
- Position: Rear Driver Side
- Replaces: 55396483AB, 55396483AD, 55396483AC
- Item Weight: 4.10 Pounds
- Item Dimensions: 25.3 x 14.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396483AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Window Regulator, Front Passenger Side Part Number: 55396480AI
$217.54 MSRP: $322.00
You Save: $104.46 (33%)
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Right; Regulator Front Door Window
- Position: Front Passenger Side
- Replaces: 55396480AF, 55396480AG, 55396480AH
- Item Weight: 5.30 Pounds
- Item Dimensions: 25.0 x 24.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396480AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Window Regulator Parts and Q&A

Q: How to Install a Rear Door Window Regulator on 2009 Jeep Commander?
A: Lift the rear window regulator inside the rear door through the big access hole and connect the third connector in the harness to the regulator motor. Connect the glass into the regulator clamps and fit bolts 1 and 2 onto the regulator rails, screwing them into place so the torque reads 8.5 Nm (75 in. lbs.). Take off the door glass's anchoring tape and then attach the window switch so the glass goes to the full up position. Make sure to tighten each window regulator glass clamp at 12 Nm (105 in. lbs.) Grab the right spot for the watershield and trim panel on the door's interior. Then, mount the watershield 1 after that. Once you've finished, try using the Clear/Relearn procedure.