How to Remove and Replace the Drive Belt on a 3.7L Engine on 2009 Jeep Liberty?

The first thing you need to do when replacing the serpentine belt is take care of the negative battery cable. After that, take out the combination reservoir/coolant container. Spin the holder for the belt until it meets its stop and carefully remove the belt. When you're done, start turning the tensioner into the free position, making sure it does not suddenly snap back.

OEM 2009 Jeep Liberty Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Drive Belt found

View related parts
2009 Jeep Liberty Serpentine Belt Part Number: 53013905AC
$37.97 MSRP: $56.25
You Save: $18.28 (33%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53013905AD, 53013905AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.1 x 3.3 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013905AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Liberty Submodels:
- Limited, Sport | 6 Cyl 3.7 L GAS

2009 Jeep Liberty Drive Belt Parts and Q&A

Q: How to Remove and Replace the Drive Belt on a 3.7L Engine on 2009 Jeep Liberty?
A: The first thing you need to do when replacing the serpentine belt is take care of the negative battery cable. After that, take out the combination reservoir/coolant container. Spin the holder for the belt until it meets its stop and carefully remove the belt. When you're done, start turning the tensioner into the free position, making sure it does not suddenly snap back.