How to Service and Repair a Parking Brake Cable for Front on 2010 Chrysler Town & Country?

The front parking brake cable should be serviced by releasing the brake, then raising and holding up the car. Release the tension by using your hands on the parking brake lever assembly. Slip the front cable out from the routing clips found in the underbody. Pull the front cable from the middle bracket by squeezing the fingers at the cap end of the cable with the wrench. Hold the automobile down and eliminate the left front door sill scuff plate along with the lower cowl trim from inside the wheel arch. Disconnect the parking brake lever retaining clips and take out the hook at the parking brake lamp switch. Take the three mounting nuts out and put the parking brake lever onto the driver's floor. See how the cable connects to the lever for reassembly before pulling the front cable button out. Press both sides of the front cable retainer fingers and pull the cable away from the parking brake lever. Slide the carpet back to remove the cable routing clip from the weld stud, unhook the cable seal from the floor pan and draw the parking brake cable out through the floor pan hole.

OEM 2010 Chrysler Town & Country Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

View related parts
2010 Chrysler Town & Country Front Cable Part Number: 4721495AC
$95.72 MSRP: $144.00
You Save: $48.28 (34%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Item Weight: 1.80 Pounds
- Item Dimensions: 1.9 x 12.9 x 35.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4721495AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Chrysler Town & Country Submodels:
- 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2010 Chrysler Town & Country Rear Cable Part Number: 4779806AB
$31.90 MSRP: $45.85
You Save: $13.95 (31%)
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 4721493AD, 4721493AE, 4721493AH, 4721493AI, 4779806AA, 4721493AG, 4721493AF
- Item Weight: 2.10 Pounds
- Item Dimensions: 14.7 x 14.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4779806AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Chrysler Town & Country Submodels:
- LX, Limited, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2010 Chrysler Town & Country Rear Cable Part Number: 4779807AB
$42.92 MSRP: $61.70
You Save: $18.78 (31%)
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 4721494AF, 4721494AE, 4721494AD, 4779807AA, 4721494AG
- Item Weight: 2.40 Pounds
- Item Dimensions: 14.6 x 14.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4779807AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Chrysler Town & Country Submodels:
- LX, Limited, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2010 Chrysler Town & Country Parking Brake Cable Parts and Q&A

Q: How to Service and Repair a Parking Brake Cable for Front on 2010 Chrysler Town & Country?
A: The front parking brake cable should be serviced by releasing the brake, then raising and holding up the car. Release the tension by using your hands on the parking brake lever assembly. Slip the front cable out from the routing clips found in the underbody. Pull the front cable from the middle bracket by squeezing the fingers at the cap end of the cable with the wrench. Hold the automobile down and eliminate the left front door sill scuff plate along with the lower cowl trim from inside the wheel arch. Disconnect the parking brake lever retaining clips and take out the hook at the parking brake lamp switch. Take the three mounting nuts out and put the parking brake lever onto the driver's floor. See how the cable connects to the lever for reassembly before pulling the front cable button out. Press both sides of the front cable retainer fingers and pull the cable away from the parking brake lever. Slide the carpet back to remove the cable routing clip from the weld stud, unhook the cable seal from the floor pan and draw the parking brake cable out through the floor pan hole.