OEM 2010 Chrysler Town & Country Power Steering Pump

2010 Chrysler Town & Country Power Steering Pump Parts and Q&A

• Q: How to Install a Power Steering Pump on a 3.3L/3.8L Engine on 2010 Chrysler Town & Country?

  A: Locate the pump on top of the engine and bolt it securely to the side with three bolts, applying 23 Nm (17 ft. lbs.) as you tighten them through the openings on the pulley. After that, place the accessory drive belt into position. Before linking the power steering pressure hose, slip on a brand new O-ring and lubricate it with clean power steering fluid. Insert the pressure hose into the pump fitting and, after threading it, tighten the tube nut until you reach 31 Nm (23 ft. lbs.) Slide the fluid supply hose onto the opening of the pump and fix it with a clamp. After reconnecting the negative battery cable to the negative post, top up and bleed the power steering system and then look for any leaks.