How to Remove and Replace a Brake Drum on 2010 Dodge Caliber?

To change the brake drum, jack up the car and remove the wheel assembly. If the drum is stuck then back off the brake adjuster screw through the support plate. Disengage the pawl with a screwdriver and rotate the adjuster wheel to slide the drum off of the.

OEM 2010 Dodge Caliber Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Drum found

View related parts
2010 Dodge Caliber Brake Drum, Rear Part Number: 5105617AC
$118.83 MSRP: $166.00
You Save: $47.17 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Drum
- Position: Rear
- Replaces: 5105617AB, 68032618AA
- Item Weight: 12.90 Pounds
- Item Dimensions: 12.9 x 12.2 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105617AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Brake Drum Parts and Q&A

Q: How to Remove and Replace a Brake Drum on 2010 Dodge Caliber?
A: To change the brake drum, jack up the car and remove the wheel assembly. If the drum is stuck then back off the brake adjuster screw through the support plate. Disengage the pawl with a screwdriver and rotate the adjuster wheel to slide the drum off of the.