How to Maintain and Repair a Speed Sensor on 2010 Dodge Caliber?

For servicing or repairing the wheel speed sensor in an all-wheel-drive vehicle, remove the cargo floor cover and the floor pan silencer in the rear (1). If necessary, take off the nuts connecting the satellite receiver (1) or amplifier (2) to the rear floor pan, then bring the part aside to expose the wheel speed sensor wiring connector in the bottom of the quarter trim panel. Unplug connector 2 from connector 3 by inserting your tool into this opening. Hold up the car, unlock the nut and remove the whole wheel that includes the tire. Through the hole in the air bag body (1), pull the grommet (2) out and then draw out the wheel speed sensor cable. Pull out the speed sensor cable routing clip (3) from the outside frame rail (4) and remove the rear suspension crossmember screw (1) holding the cable routing clamp (3) in place. Following this, pull the cable routing clip off the trailing link and remove the holding screw. After that, remove the wheel speed sensor head (1) from the hub and bearing on the rear of the axle (2) and take out the sensor from the vehicle.

OEM 2010 Dodge Caliber Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2010 Dodge Caliber ABS Sensor, Front Passenger Side Part Number: 5105572AB
$38.64 MSRP: $57.25
You Save: $18.61 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; Front Right ABS Wheel Speed Sensor.; Front Speed Sensor; Sensor Anti-Lock Brakes; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Replaces: 5105572AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.2 x 6.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105572AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber ABS Sensor, Front Driver Side Part Number: 5105573AB
$40.02 MSRP: $57.50
You Save: $17.48 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; Front Left ABS Wheel Speed Sensor.; Front Speed Sensor; Sensor Anti-Lock Brakes; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Replaces: 5105573AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 12.7 x 8.5 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105573AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Vehicle Speed Sensor Part Number: 5189840AB
$69.24 MSRP: $105.00
You Save: $35.76 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Secondary Revolution
- Replaces: 5189840AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.8 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5189840AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Vehicle Speed Sensor Part Number: 5189841AB
$57.53 MSRP: $86.30
You Save: $28.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Primary Revolution
- Replaces: 5189841AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.6 x 1.1 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5189841AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Speed Sensor Parts and Q&A

Q: How to Maintain and Repair a Speed Sensor on 2010 Dodge Caliber?
A: For servicing or repairing the wheel speed sensor in an all-wheel-drive vehicle, remove the cargo floor cover and the floor pan silencer in the rear (1). If necessary, take off the nuts connecting the satellite receiver (1) or amplifier (2) to the rear floor pan, then bring the part aside to expose the wheel speed sensor wiring connector in the bottom of the quarter trim panel. Unplug connector 2 from connector 3 by inserting your tool into this opening. Hold up the car, unlock the nut and remove the whole wheel that includes the tire. Through the hole in the air bag body (1), pull the grommet (2) out and then draw out the wheel speed sensor cable. Pull out the speed sensor cable routing clip (3) from the outside frame rail (4) and remove the rear suspension crossmember screw (1) holding the cable routing clamp (3) in place. Following this, pull the cable routing clip off the trailing link and remove the holding screw. After that, remove the wheel speed sensor head (1) from the hub and bearing on the rear of the axle (2) and take out the sensor from the vehicle.