How to Remove and Replace a Rear Brake Caliper on 2010 Dodge Caliber?

Depress the brake pedal at least 1 inch using a brake pedal holding thing, keeping it down to prevent fluid from leaving the master cylinder as the rear brake is removed and changed. After that, elevate and brace the vehicle and take off the three wheel bolts as well as the rear wheel and tire. Take out the nut on the brake tube on the rear flex hose, then freed the clip that keeps the flex hose attached to the trailing link mounted bracket to remove the flex hose from the bracket. Take the brake flex hose out of the brake caliper by removing its attachments. While undoing the two brake caliper guide pin bolts, remember that one has a special sleeve at the tip and the other is plain; which has the sleeve depends on the model, as it can be installed at either the top or bottom, again depending on the car. Align and reinsert the bolts to their previous locations so NVH does not become a problem. After removing the brake caliper guide pin bolts, slide the caliper with its outboard pad along the adapter bracket toward the wheel, disconnect the caliper and rotor and then raise it up to remove the brake disc. In the end, use a tool to move the clip over the raised piece of the caliper and then take out the outside brake pad.

OEM 2010 Dodge Caliber Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2010 Dodge Caliber Caliper, Rear Passenger Side Part Number: 5191268AA
$85.72 MSRP: $129.00
You Save: $43.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 4.30 Pounds
- Item Dimensions: 9.5 x 7.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191268AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Caliper, Front Driver Side Part Number: 5191239AA
$113.04 MSRP: $171.00
You Save: $57.96 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Driver Side
- Item Weight: 8.00 Pounds
- Item Dimensions: 9.5 x 7.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191239AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Caliper, Rear Driver Side Part Number: 68020261AB
$125.07 MSRP: $188.00
You Save: $62.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.30 Pounds
- Item Dimensions: 10.2 x 7.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020261AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Caliper, Rear Driver Side Part Number: 5191267AA
$85.72 MSRP: $129.00
You Save: $43.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.00 Pounds
- Item Dimensions: 10.1 x 7.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191267AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Caliper, Front Passenger Side Part Number: 5191238AA
$130.02 MSRP: $181.00
You Save: $50.98 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 8.10 Pounds
- Item Dimensions: 9.3 x 7.4 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191238AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Caliper, Rear Passenger Side Part Number: 68020252AB
$108.84 MSRP: $145.00
You Save: $36.16 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Passenger Side
- Replaces: 68020252AA
- Item Weight: 4.10 Pounds
- Item Dimensions: 10.3 x 7.4 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020252AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Brake Caliper Parts and Q&A

Q: How to Remove and Replace a Rear Brake Caliper on 2010 Dodge Caliber?
A: Depress the brake pedal at least 1 inch using a brake pedal holding thing, keeping it down to prevent fluid from leaving the master cylinder as the rear brake is removed and changed. After that, elevate and brace the vehicle and take off the three wheel bolts as well as the rear wheel and tire. Take out the nut on the brake tube on the rear flex hose, then freed the clip that keeps the flex hose attached to the trailing link mounted bracket to remove the flex hose from the bracket. Take the brake flex hose out of the brake caliper by removing its attachments. While undoing the two brake caliper guide pin bolts, remember that one has a special sleeve at the tip and the other is plain; which has the sleeve depends on the model, as it can be installed at either the top or bottom, again depending on the car. Align and reinsert the bolts to their previous locations so NVH does not become a problem. After removing the brake caliper guide pin bolts, slide the caliper with its outboard pad along the adapter bracket toward the wheel, disconnect the caliper and rotor and then raise it up to remove the brake disc. In the end, use a tool to move the clip over the raised piece of the caliper and then take out the outside brake pad.