How to Remove the Parking Brake Shoe on Each Side on 2010 Dodge Challenger?

Before you take the parking brake shoes out, raise and support the vehicle. After that, remove the rear hub and its bearing. Remove all pressure from the parking brake shoe adjustment. Eliminate the parking brake shoe adjuster spring prior to the shoe adjuster. Pull the upper brake shoe hold-down clip and pin from its location, then remove the upper shoe from the return spring and shoe actuator lever. Take the return spring out of the lower shoe and then remove the lever at the end of the cable from the shoe actuator. Remove the lower side brake shoe's hold-down clip and pin as the last step and then take the brake shoe down. Evaluate the springs, adjuster, lever and aluminum shoe anchor pin; if they are damaged, change them accordingly.

OEM 2010 Dodge Challenger Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Parking Brake Shoe found

View related parts
2010 Dodge Challenger Parking Brake Shoes, Rear Part Number: 68020626AB
$90.76 MSRP: $136.00
You Save: $45.24 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Shoes; Shoe And Lining Kit Parking Brake; Parking Brake Shoe
- Position: Rear
- Replaces: 5137624AA, 68020626AA, 68020626AC, 5103204AA
- Item Weight: 3.20 Pounds
- Item Dimensions: 10.1 x 6.0 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020626AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2010 Dodge Challenger Parking Brake Shoe Parts and Q&A

Q: How to Remove the Parking Brake Shoe on Each Side on 2010 Dodge Challenger?
A: Before you take the parking brake shoes out, raise and support the vehicle. After that, remove the rear hub and its bearing. Remove all pressure from the parking brake shoe adjustment. Eliminate the parking brake shoe adjuster spring prior to the shoe adjuster. Pull the upper brake shoe hold-down clip and pin from its location, then remove the upper shoe from the return spring and shoe actuator lever. Take the return spring out of the lower shoe and then remove the lever at the end of the cable from the shoe actuator. Remove the lower side brake shoe's hold-down clip and pin as the last step and then take the brake shoe down. Evaluate the springs, adjuster, lever and aluminum shoe anchor pin; if they are damaged, change them accordingly.