How to Service and Repair a Power Steering Hose on Dodge Challenger?

At the start, unsolder the negative battery cable from its post and then separate it from the battery. Second, drain the power steering fluid from its reservoir and remove the air cleaner housing along with the tube to the throttle body. Take out the tube nut from the system and remove the pressure hose from the pump. Support the vehicle and lift it and after that, take out the belly pan. Then, unscrew the clamp that holds the pressure hose to the front of the engine cradle and next, remove the routing clamps for the pressure and return hoses on the right side of the engine cradle. Lastly, unbolt the lock nut on the pressure hose tube that goes to the steering gear and weeks the hose off your car.

How to Install a Power Steering Hose on Dodge Challenger?

You should start by attaching the pressure side of the hose to the engine compartment so that the new O-ring is at the under-side. Pour a little clean power steering fluid on the new O-ring at the steering gear and do not tighten the tube nut yet when you attach the pressure hose. Bring the pressure hose next to the right side of the engine cradle, place the routing clamp over the return hose routing clamp and use a screw to secure them. Keep guiding the pressure hose along the front part of the engine cradle and put a screw through the routing clamp to tighten it. Make sure to tighten the hose nut located on the steering gear assembly to 47 Nm (35 ft. lbs.). Apply the belly pan; put the car on the ground and fit a new O-ring at the hose attachment. Put a few drops of power steering fluid on the new O-ring, then join the pressure hose to the pump while tightening the bolt to 10 Nm (89 in. lbs.). Put the air cleaner housing back in place, attach the inlet tube and secure the negative battery cable to the battery post. The last stage is to fill and bleed the power steering system.

OEM Dodge Challenger Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Power Steering Hoses found

View related parts
Dodge Challenger Power Steering Return Hose Part Number: 68217585AA
$80.34 MSRP: $123.00
You Save: $42.66 (35%)
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Return Hose; Hose Power Steering Return
- Replaces: 4584563AC, 4584563AE, 4584563AB, 4584563AD, 4584563AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Challenger | R/T, R/T Classic, Rallye Redline, SE, SXT, SXT Plus | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Challenger Power Steering Pressure Hose Part Number: 68043618AD
$97.44 MSRP: $146.00
You Save: $48.56 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose; Lower Pressure Hose
- Replaces: 68043618AC, 68043618AA, 68043618AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T, SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Power Steering Pressure Hose Part Number: 4782518AI
$109.27 MSRP: $166.00
You Save: $56.73 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose; Lower Pressure Hose; Upper Pressure Hose
- Replaces: 4782518AG, 4782518AH, 4782518AE, 4782518AD, 4782518AC, 4782518AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Challenger | R/T, SRT8 | 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Power Steering Pressure Hose Part Number: 4782363AF
$213.00 MSRP: $317.00
You Save: $104.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Return Hose; Power Steering Hose; Return Hose; Upper Pressure Hose; Lower Return Hose
- Replaces: 4782363AC, 4782363AD, 4782363AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Power Steering Pressure Hose Part Number: 4782350AC
$35.72 MSRP: $53.20
You Save: $17.48 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Supply; Power Steering Reservoir Hose; Power Steering Hose; Power Steering Suction Hose; Upper Return Hose; Hose Power Steering Supply Reservoir To Pump; Hose Power Steering Supply
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Power Steering Pressure Hose Part Number: 68217583AA
$136.03 MSRP: $205.00
You Save: $68.97 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 4584559AE, 4584559AC, 4584559AA, 4584559AD, 4584559AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Challenger | R/T, R/T Classic, Rallye Redline, SE, SXT, SXT Plus | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Challenger Power Steering Return Hose Part Number: 68044363AC
$45.62 MSRP: $67.90
You Save: $22.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Lower Return Hose
- Replaces: 68044363AA, 4895221AC, 68044363AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T, SE, SRT8 | 3.5L V6, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Power Steering Return Hose Part Number: 68078545AG
$51.81 MSRP: $77.00
You Save: $25.19 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Return Hose; Upper Return Hose; Hose Power Steering Return
- Replaces: 68078545AC, 68078545AB, 68078545AE, 68078545AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2018 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Shaker, SRT 392, SRT Demon, SRT Hellcat, SRT Hellcat Widebody, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392 | 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Power Steering Return Hose Part Number: 4854545AA
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Return Hose; Upper Pressure Hose; Lower Return Hose; Hose Power Steering Return
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Challenger | SRT8 | 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Power Steering Suction Hose Part Number: 4782349AC
Product Specifications
- Other Name: Hose - Power Steering Supply; Power Steering Reservoir Hose; Power Steering Hose; Upper Return Hose; Hose Power Steering Supply
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | SE | 6 Cyl 3.5 L GAS
View related parts
Dodge Challenger Power Steering Return Hose Part Number: 68044362AA
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Upper Pressure Hose; Lower Return Hose; Hose Power Steering Return Cooler To Reservoir; Hose Power Steering Return
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Lower Return Hose Part Number: 68043769AC
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Return Hose; Power Steering Hose; Hose Power Steering Return Gear To Cooler
- Replaces: 68043769AA, 68043769AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Challenger Power Steering Return Hose Part Number: 68078363AJ
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Return Hose; Lower Return Hose; Hose Power Steering Return
- Replaces: 68078363AF, 68078363AH, 68078363AD, 68078363AI, 68078363AC, 68078363AG, 68078363AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2018 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Shaker, SRT 392, SRT Demon, SRT Hellcat, SRT Hellcat Widebody, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392 | 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Power Steering Pressure Hose Part Number: 4578752AE
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 4578752AC, 4578752AD, 4578752AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Challenger Power Steering Pressure Hose Part Number: 5181618AB
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 5181618AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Dodge Challenger | SRT8 | 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Power Steering Pressure Hose Part Number: 5180007AF
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose; Lower Pressure Hose
- Replaces: 5180007AE, 5180007AA, 5180007AC, 5180007AD, 5180007AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Challenger | SE | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Challenger Power Steering Pressure Hose Part Number: 68241524AC
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose; Hose Power Steering Pressure
- Replaces: 68241524AB, 5181618AE, 5181618AD, 5181618AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2018 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Shaker, SRT 392, SRT Demon, SRT Hellcat, SRT Hellcat Widebody, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392 | 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

Dodge Challenger Power Steering Hose

Choose OEM Power Steering Hose that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Power Steering Hose follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Power Steering Hose of the Dodge Challenger's is one of the noteworthy parts that is crucial to the efficient running of the Power Steering in the Dodge Challenger. This hose links the power steering gear to the steering pump, where it helps to transfer the pressured steering fluid which enhances the responsiveness to steering. After sometimes the Dodge Challenger Power Steering Hose may wear out due to frequent vibrations and high temperatures that causes leakage which hampers the efficient steering. Common signs of a faulty Power Steering Hose are when it becomes harder to turn the steering wheel and when you hear unusual sounds; therefore, owners of Dodge Challenger should not wait for a long time before they fix this problem so that it cannot cause a great problem that will lead to an accident. This Power Steering Hose fits different Dodge challenger generations including the first, second, and third generation increasing the performance of the car and comfort when driving. Its design is purposely independent of the road conditions during high speed performance driving and to ensure that the steering system produces the prime results. For instance, the Dodge Challenger Power Steering Hose sets itself out in the market because of its tough build and a reliable feature to support the cushty that is the emblem of the Dodge brand. In this way, ensuring that the steering system provides a perfect control, this Power Steering Hose not only contributes to more comfortable driving and, thus, to greater pleasre, but also strengthens the security of the Dodge Challenger That is why, this component should be considered as rather important for any fan of the given car model.

Dodge Challenger Power Steering Hose Parts and Q&A

Power Steering Pressure Hose
4782518AI
Q: How to Service and Repair a Power Steering Hose on Dodge Challenger?
A:
At the start, unsolder the negative Battery Cable from its post and then separate it from the battery. Second, drain the power steering fluid from its reservoir and remove the air cleaner housing along with the tube to the throttle body. Take out the tube nut from the system and remove the pressure hose from the pump. Support the vehicle and lift it and after that, take out the belly pan. Then, unscrew the clamp that holds the pressure hose to the front of the engine cradle and next, remove the routing clamps for the pressure and return hoses on the right side of the engine cradle. Lastly, unbolt the lock nut on the pressure hose tube that goes to the steering gear and weeks the hose off your car.
Power Steering Pressure Hose
4782350AC
Q: How to Install a Power Steering Hose on Dodge Challenger?
A:
You should start by attaching the pressure side of the hose to the engine compartment so that the new O-ring is at the under-side. Pour a little clean power steering fluid on the new O-ring at the steering gear and do not tighten the tube nut yet when you attach the pressure hose. Bring the pressure hose next to the right side of the engine cradle, place the routing clamp over the return hose routing clamp and use a screw to secure them. Keep guiding the pressure hose along the front part of the engine cradle and put a screw through the routing clamp to tighten it. Make sure to tighten the hose nut located on the steering gear assembly to 47 Nm (35 ft. lbs.). Apply the belly pan; put the car on the ground and fit a new O-ring at the hose attachment. Put a few drops of power steering fluid on the new O-ring, then join the pressure hose to the pump while tightening the bolt to 10 Nm (89 in. lbs.). Put the air cleaner housing back in place, attach the inlet tube and secure the negative Battery Cable to the battery post. The last stage is to fill and bleed the power steering system.