How to Service and Repair a Steering Knuckle on 2010 Dodge Challenger?

In order to service and repair the steering knuckle, start by setting up Ball Joint Press C-4212F in a vise so that it performs best. Place Insert Ball Joint Remover/Installer 9320-4 into the cup portion of Ball Joint Press C-4212F and secure set screw. Then, ensure that Ball Joint Remover/Installer 9320-3 is on the screw-drive end of Ball Joint Press C-4212F with it facing the right direction of installation. Install the new ball joint into the knuckle-bore with the knuckle over the tools so that the top of the ball joint runs into the installer until the outside flange of the ball-joint bottoms into the installer. Press screw-drive tightened by hand until remover bottoms on knuckle after which knuckle are tightened with hand tools with screw-drive pressed into knuckle until flange stops operating against it. Unscrew the screw-drive and take out the knuckle of the press then fit the snap-ring in the groove at the bottom of the ball joint. Lastly, check the ball joint to make sure it fits well then install the knuckle onto the car after making sure seal boot is smooth and wire rings are applied.

OEM 2010 Dodge Challenger Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Steering Knuckles found

View related parts
2010 Dodge Challenger Knuckle, Rear Driver Side Part Number: 4782587AF
$666.31 MSRP: $943.00
You Save: $276.69 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Rear; Suspension Knuckle, Rear Left
- Position: Rear Driver Side
- Replaces: 4782587AD, 4782587AC
- Item Weight: 5.90 Pounds
- Item Dimensions: 13.4 x 9.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782587AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Knuckle, Rear Passenger Side Part Number: 4782586AF
$609.96 MSRP: $924.00
You Save: $314.04 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Rear; Suspension Knuckle, Rear Right
- Position: Rear Passenger Side
- Replaces: 4782586AD, 4782586AC
- Item Weight: 5.00 Pounds
- Item Dimensions: 13.4 x 9.8 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782586AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Knuckle, Front Driver Side Part Number: 4782741AD
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left
- Position: Front Driver Side
- Replaces: 4782741AC, 4782741AB
- Item Weight: 16.70 Pounds
- Item Dimensions: 8.0 x 9.2 x 21.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782741AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2010 Dodge Challenger Knuckle, Front Driver Side Part Number: 5039027AE
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left
- Position: Front Driver Side
- Replaces: 5039027AB, 5039031AC, 5039031AE, 5039031AD, 5039027AC
- Item Weight: 20.30 Pounds
- Item Dimensions: 22.1 x 9.6 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5039027AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, R/T Classic, Rallye Redline, SE, SRT8, SXT, SXT Plus | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Knuckle, Front Part Number: 5039030AE
Product Specifications
- Other Name: Knuckle - Front; Knuckle Front
- Position: Front
- Replaces: 5039030AB, 5039030AC, 5039030AD
- Item Weight: 20.70 Pounds
- Item Dimensions: 23.5 x 8.4 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5039030AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, R/T Classic, Rallye Redline, SE, SRT8, SXT, SXT Plus | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Knuckle, Rear Passenger Side Part Number: 68248386AA
Product Specifications
- Other Name: Knuckle - Rear; Suspension Knuckle, Rear Right
- Position: Rear Passenger Side
- Replaces: 4854458AB, 4854458AA, 4854458AC, 4854458AD
- Item Weight: 13.80 Pounds
- Item Dimensions: 13.2 x 12.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68248386AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Knuckle, Rear Driver Side Part Number: 68248387AA
Product Specifications
- Other Name: Knuckle - Rear; Suspension Knuckle, Rear Left
- Position: Rear Driver Side
- Replaces: 4854459AD, 4854459AC, 4854459AB, 4854459AA
- Item Weight: 5.60 Pounds
- Item Dimensions: 12.8 x 12.5 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68248387AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2010 Dodge Challenger Knuckle, Front Passenger Side Part Number: 4782740AD
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right
- Position: Front Passenger Side
- Replaces: 4782740AB, 4782740AC, 4782740AA
- Item Weight: 18.10 Pounds
- Item Dimensions: 20.9 x 8.9 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782740AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2010 Dodge Challenger Steering Knuckle Parts and Q&A

Q: How to Service and Repair a Steering Knuckle on 2010 Dodge Challenger?
A: In order to service and repair the steering knuckle, start by setting up Ball Joint Press C-4212F in a vise so that it performs best. Place Insert Ball Joint Remover/Installer 9320-4 into the cup portion of Ball Joint Press C-4212F and secure set screw. Then, ensure that Ball Joint Remover/Installer 9320-3 is on the screw-drive end of Ball Joint Press C-4212F with it facing the right direction of installation. Install the new ball joint into the knuckle-bore with the knuckle over the tools so that the top of the ball joint runs into the installer until the outside flange of the ball-joint bottoms into the installer. Press screw-drive tightened by hand until remover bottoms on knuckle after which knuckle are tightened with hand tools with screw-drive pressed into knuckle until flange stops operating against it. Unscrew the screw-drive and take out the knuckle of the press then fit the snap-ring in the groove at the bottom of the ball joint. Lastly, check the ball joint to make sure it fits well then install the knuckle onto the car after making sure seal boot is smooth and wire rings are applied.