Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Jeep Liberty Air Bag Sensor

Air Bag Impact Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

  • 2010 Jeep Liberty Air Bag Sensor - 68056160AA
    2010 Jeep Liberty Air Bag Sensor - 68056160AA
    2010 Jeep Liberty Air Bag Sensor Diagram - 68056160AA
    View related parts

    2010 Jeep Liberty Impact Sensor, Outer Part Number: 68056160AA

    $158.62 MSRP: $234.00
    You Save: $75.38 (33%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer, Rear; Air Bag Sensor; Side Impact Sensor; Sensor for Side Airbag Impact and B/C Pillar.
    • Position: Outer
    • Replaces: 4896153AC
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 2.6 x 1.1 x 0.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68056160AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Jeep Liberty Submodels:
    • Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
  • 2010 Jeep Liberty Air Bag Sensor - 68056162AA
    2010 Jeep Liberty Air Bag Sensor - 68056162AA
    2010 Jeep Liberty Air Bag Sensor - 68056162AA
    2010 Jeep Liberty Air Bag Sensor Diagram - 68056162AA
    View related parts

    2010 Jeep Liberty Air Bag Sensor, Rear Part Number: 68056162AA

    $89.62 MSRP: $132.00
    You Save: $42.38 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front, Side, B Pillar, and C Pillar Sensors.
    • Position: Rear
    • Replaces: 4896152AC
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 1.2 x 1.5 x 2.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 68056162AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Jeep Liberty Submodels:
    • Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS

2010 Jeep Liberty Air Bag Sensor Parts and Q&A

  • Q: What Precautions Are Necessary Before Servicing the Air Bag Sensor in the C-Pillar on 2010 Jeep Liberty?
    A: Always begin side impact sensor C-pillar servicing by disabling the Supplemental Restraint System (SRS) through disconnecting and isolating the negative battery cable, then wait for two minutes for the air bag system capacitor to discharge. Not taking these precautions may cause the air bag to activate by mistake which could be very dangerous. Never strike or drop the side impact sensor, since it could become broken or misaligned; designed to protect the side air bags, a new sensor is needed if one is dropped. The front and side impact sensors can both be installed at any point on the sensor cluster. Take off the negative battery bolt first and give time for the system capacitor to drain. After that, take out the lower trim from the inside face of the right or left C-pillar. After that, take out the bolt that holds the side impact sensor to the lower C-pillar weld stud and get the sensor off the inner C-pillar weld stud. Disconnect the wire connector from the side impact sensor's plug in the main harness wiring.

Related 2010 Jeep Liberty Parts

Alternate Year Models

+
2009 Jeep Liberty Air Bag Sensor 2011 Jeep Liberty Air Bag Sensor