Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Jeep Liberty Air Bag Control Module

SRS Airbag Module
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Control Modules found

  • 2010 Jeep Liberty Air Bag Control Module - 56054603AE
    2010 Jeep Liberty Air Bag Control Module - 56054603AE
    2010 Jeep Liberty Air Bag Control Module - 56054603AE
    2010 Jeep Liberty Air Bag Control Module - 56054603AE
    2010 Jeep Liberty Air Bag Control Module Diagram - 56054603AE
    View related parts

    2010 Jeep Liberty Control Module Part Number: 56054603AE

    $280.98 MSRP: $419.00
    You Save: $138.02 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit; Module Occupant Restraint
    • Replaces: 56054603AB, 56054603AC, 56054503AA, 56054603AA, 56054603AD
    • Item Weight: 1.70 Pounds
    • Item Dimensions: 9.3 x 7.4 x 7.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 56054603AE
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Jeep Liberty Submodels:
    • Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
  • 2010 Jeep Liberty Air Bag Control Module - 4896049AB
    2010 Jeep Liberty Air Bag Control Module Diagram - 4896049AB
    View related parts

    2010 Jeep Liberty Position Sensor Part Number: 4896049AB

    $258.32 MSRP: $384.00
    You Save: $125.68 (33%)
    ADD TO CART
    Product Specifications
    • Other Name: Module - Occupant Classification; Occupant Module; Module Occupant Classification
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 7.0 x 3.9 x 3.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4896049AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Jeep Liberty Submodels:
    • Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS

2010 Jeep Liberty Air Bag Control Module Parts and Q&A

  • Q: How to Safely Install and Connect an Air Bag Control Module on 2010 Jeep Liberty?
    A: The first step of installing an Occupant Restraint Controller (ORC) is to turn off the Supplemental Restraint System (SRS) by disconnecting and isolating the battery negative cable for two minutes, so the air bag won't mistakenly trigger. Place the ORC onto the floor panel transmission tunnel so the arrow faces forward and the pin in the right mounting flange clicks into the bracket. Attach the ORC to the bracket using three screws and turn each to 10.5 Nm (95 in. lbs. Free the lever arms on the connectors before putting them in the ORC receptacles and then secure the latches on both parts. After covering the ORC, make sure both latches are locked and install the center console over the floor panel transmission tunnel. Remain sure not to connect the negative battery cable until the SRS verification test has been done after any SRS part has been serviced.

Related 2010 Jeep Liberty Parts

Alternate Year Models

+
2009 Jeep Liberty Air Bag Control Module 2011 Jeep Liberty Air Bag Control Module