How to Remove a Wiper Motor on 2010 Jeep Liberty?

Before removing the wiper motor, you should disconnect and cut off the battery's ground cable. Then, get rid of the rear wiper arm from the motor's output shaft. There is no need to take out the bezel or grommet from the output shaft. After that, take the trim panel off the inside of the liftgate. Take the wire harness connector out of the rear wiper motor, unbolt the three screws holding the motor mounting bracket to the panel of the liftgate and remove the screws. Afterward, take the motor from the liftgate and get rid of the bezel and rubber grommet from the outer liftgate panel's hole where the output shaft is located, taking care not to harm the panel's paint.

OEM 2010 Jeep Liberty Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
2010 Jeep Liberty Wiper Motor Part Number: 57010090AC
$132.69 MSRP: $199.00
You Save: $66.31 (34%)
ADD TO CART
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor; Motor Rear Window Wiper; Motor Liftgate Wiper
- Replaces: 57010090AA, 57010090AB
- Item Weight: 3.50 Pounds
- Item Dimensions: 9.1 x 7.1 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 57010090AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
2010 Jeep Liberty Wiper Linkage Part Number: 68020720AD
Product Specifications
- Other Name: Motor - Windshield Wiper; Wiper Motor; Front Motor; Motor And Linkage Windshield Wiper
- Replaces: 68020720AB, 68020720AA
- Item Weight: 4.70 Pounds
- Item Dimensions: 22.1 x 7.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020720AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

2010 Jeep Liberty Wiper Motor Parts and Q&A

Q: How to Remove a Wiper Motor on 2010 Jeep Liberty?
A: Before removing the wiper motor, you should disconnect and cut off the battery's ground cable. Then, get rid of the rear wiper arm from the motor's output shaft. There is no need to take out the bezel or grommet from the output shaft. After that, take the trim panel off the inside of the liftgate. Take the wire harness connector out of the rear wiper motor, unbolt the three screws holding the motor mounting bracket to the panel of the liftgate and remove the screws. Afterward, take the motor from the liftgate and get rid of the bezel and rubber grommet from the outer liftgate panel's hole where the output shaft is located, taking care not to harm the panel's paint.