How to Safely Service the Air Bag Control Module on Chrysler 300?

The first step in servicing the Air Bag Control Module is to unhook and isolate the negative battery cable, letting the air bag system reserve capacitor discharge for about two minutes before doing anything else. Take out the center floor console and cut off two electrical connectors. Slide the sound deadening material aside as required to open the area with the mounting screws and remove the three screws holding the ORC. Take care not to damage the attachment location while installing the ORC and after positioning, tighten the three screws until they reach 11 N.m (97 in.lbs.). Deaden the sound in your car by installing the material again, attaching the two electric cable connectors and fitting the center console. Connecting the negative battery connector before doing the air bag test may result in serious harm or death to the person performing it. It is important to replace the Occupant Classification Module and the Occupant Restraint Controller separately, since doing them together may cause serious problems and put passengers at risk of injury.

How to Safely Install the Air Bag Control Module on Chrysler 300?

Ensure the spot chosen for the Air Bag Control Module is not affected to ensure the module is put in the right place. Never do both replacements together; instead, first change one and run an air bag System test and then change the second. Place the ORC where it should be using the three mounting screws and tighten them to 11 Nm (97 in. lbs.). After installing the deadening material on the ORC, join the two electrical connectors which are known as C1 and C2 in your diagnostic and wiring information. After all the installation, wait to fix the center console until after the system test. Then, do not hook up the battery negative cable until all is finished, so avoid possible accidents.

OEM Chrysler 300 Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Air Bag Control Modules found

View related parts
Chrysler 300 Control Module, Passenger Side Part Number: 56043195AZ
$374.94 MSRP: $548.00
You Save: $173.06 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Occupant Classification; Air Bag Passenger Presence Module, Right; SDM Module; Diagnostic Module; Passenger Sensor; Occupant Module; Module; Module Occupant Classification
- Position: Passenger Side
- Replaces: 56043195AX, 56043195AS, 56043195AR, 56043195AT, 56043195AP
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 2.7L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Occupant Module Part Number: 56043195BB
$194.21 MSRP: $246.20
You Save: $51.99 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Occupant Classification; Air Bag Passenger Presence Module; Module; Module Occupant Classification
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 SDM Module Part Number: 68105510AE
$312.72 MSRP: $478.00
You Save: $165.28 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit; Module Occupant Restraint
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2017 Chrysler 300 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, SRT8 Core | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 SDM Module Part Number: 68371752AA
$333.10 MSRP: $496.00
You Save: $162.90 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit; Module Occupant Restraint
- Replaces: 68316752AB, 68297878AA, 68227452AC, 68227452AE, 68227452AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Chrysler 300 | C, C Platinum, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 SDM Module Part Number: 5081041AG
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit; Occupant Module; Module Occupant Restraint
- Replaces: 5081041AE, 5081041AC, 5081041AD, 5081041AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Diagnostic Unit Part Number: 68001372AB
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Occupant Module; Module Occupant Restraint
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Diagnostic Unit Part Number: 68001371AB
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Occupant Module; Module Occupant Restraint
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 SDM Module Part Number: 68105510AD
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit; Module Occupant Restraint
- Replaces: 68105510AA, 68105510AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 SDM Module Part Number: 4602299AI
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit
- Replaces: 4602299AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 SDM Module Part Number: 4896097AG
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit; Occupant Module; Module Occupant Restraint
- Replaces: 4896097AD, 4896097AC, 4896097AF, 4896097AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler 300 | C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 SDM Module Part Number: 4896098AH
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit; Occupant Module
- Replaces: 4896098AC, 4896098AE, 4896098AF, 4896098AD, 4896098AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler 300 | C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 SDM Module Part Number: 5081042AG
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit; Occupant Module; Module Occupant Restraint
- Replaces: 5081042AF, 5081042AE, 5081042AD, 5081042AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Chrysler 300 Air Bag Control Module

Choose OEM Air Bag Control Module that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Air Bag Control Module follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

As the essential part of the supplemental restraint system the Chrysler 300 Air Bag Control Module maintains a strong reputation for dependability and safety performance during accidents. Upon sensing major collision impacts the sophisticated module activates airbag deployment for essential protection in case of accidents. The Chrysler 300 has progressed through multiple Air Bag Control Module generations as companies refined both the unit size and electronic control units (ECUs) which increased performance while adding greater protection features. At each startup the diagnostic test capability ensures the Chrysler 300 stands ready for any situation which strengthens its position in automotive markets. The Air Bag Control Module operates seamlessly with all model versions of the Chrysler 300 base and Touring and Limited editions and 300C and SRT-8 performance models indicating its programming flexibility across product trims. Post-accident evaluations depend on this module to store crash data while demonstrating higher levels of safety designed into automotive products. The Chrysler 300 Air Bag Control Module stands out in the market due to its real-time monitoring features and advanced diagnostic functions which improve overall driving experience. The Chrysler model Air Bag Control Module serves as a safety and performance essential which demonstrates the brand's strong dedication to generating secure reliable driving conditions.

Chrysler 300 Air Bag Control Module Parts and Q&A

Control Module, Passenger Side
56043195AZ
Q: How to Safely Service the Air Bag Control Module on Chrysler 300?
A:
The first step in servicing the Air Bag Control Module is to unhook and isolate the negative Battery Cable, letting the air bag system reserve capacitor discharge for about two minutes before doing anything else. Take out the center floor console and cut off two electrical connectors. Slide the sound deadening material aside as required to open the area with the mounting screws and remove the three screws holding the ORC. Take care not to damage the attachment location while installing the ORC and after positioning, tighten the three screws until they reach 11 N.m (97 in.lbs.). Deaden the sound in your car by installing the material again, attaching the two electric cable connectors and fitting the center console. Connecting the negative battery connector before doing the air bag test may result in serious harm or death to the person performing it. It is important to replace the Occupant Classification Module and the Occupant Restraint Controller separately, since doing them together may cause serious problems and put passengers at risk of injury.
Occupant Module
56043195BB
Q: How to Safely Install the Air Bag Control Module on Chrysler 300?
A:
Ensure the spot chosen for the Air Bag Control Module is not affected to ensure the module is put in the right place. Never do both replacements together; instead, first change one and run an air bag System test and then change the second. Place the ORC where it should be using the three mounting screws and tighten them to 11 Nm (97 in. lbs.). After installing the deadening material on the ORC, join the two electrical connectors which are known as C1 and C2 in your diagnostic and wiring information. After all the installation, wait to fix the center console until after the system test. Then, do not hook up the battery negative cable until all is finished, so avoid possible accidents.