How to Install a Blower Motor Resistor in the Front HVAC Housing on Chrysler Aspen?

Lay the blower motor resistor into the front unit of the vehicle's HVAC assembly. Secure the blower motor resistor on the front housing with two screws that you tighten to 2 Nm (17 in. lbs.). Link the wire harness connector to the blower motor resistor. If the trim cover is available, put it over the blower motor resistor and secure it with two screws, tightening them to 2 Nm (17 in. lbs.). Lastly, link the negative battery cable back to its position.

How to Safely Remove and Service a Blower Motor Resistor on Chrysler Aspen?

For vehicles with air bags, first connect the negative battery cable to disconnect it and give the air bag system two minutes to discharge. Let the blower motor rest for at least five minutes so that the resistors in the motor can cool; they may become very hot when used. Don't remove the resistor and operate the blower motor, as it could damage the car. The first thing to do is disconnect and separate the negative battery cable. If there is a trim cover, inside the instrument panel, take out the screws that hold it in place over the blower motor resistor below the right side, then get rid of the cover. After that, take out the connection between the wire harness and the blower motor resistor. Open the front HVAC housing and then remove the two screws holding down the blower motor resistor. After that, lift out the blower motor resistor.

OEM Chrysler Aspen Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motor Resistors found

View related parts
Chrysler Aspen Blower Motor Resistor, Rear Part Number: 5019639AA
$46.35 MSRP: $99.55
You Save: $53.20 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Rear; Resistor; Resistor Blower Motor
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Control Module, Front Part Number: 68317103AA
$119.31 MSRP: $179.00
You Save: $59.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Power; HVAC Blower Motor Control Module; Front Control Module; Blower Motor Regulator; Module; Resistor
- Position: Front
- Replaces: 5143824AA, 5061587AA, 5179985AA, 4596304AC, 4596304AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Resistor, Front Part Number: 5061575AA
$21.34 MSRP: $31.60
You Save: $10.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Front; HVAC Blower Motor Regulator; Resistor Blower Motor; HVAC Blower Motor Resistor; Blower Motor Resistor
- Position: Front
- Replaces: 4885635AC, 5174618AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

Chrysler Aspen Blower Motor Resistor

Choose OEM Blower Motor Resistor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Blower Motor Resistor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Blower Motor Resistor is one of the most important parts that are stable and reliable in Chrysler aspen vehicle models. This already crucial segment controls the speed of the blower motor, thus controlling the airflow for heating and cooling the cabin, which improves passengers' comfort levels considerably. Variation of the electrical resistance is the main function of the Blower Motor Resistor, providing a perfect tool to ensure the comfortable climate inside the car regardless of the outer conditions. Specifically designed for Chrysler Aspen, the blower motor resistor is compatible with automobiles manufactured from 2006 to 2008 with the 2008 model being the last. Due to the capacity to vary the voltage provided to the blower motor, it can change the speed, which enhances automobile reliability as well as safety. In return, a high-performance Chrysler Aspen with features such as a commodious interior profits from the well functioning of the Blower Motor Resistor. Also, the Blower Motor Resistor is built to last long and give the premier service as required. Using both technological perkiness and user-pleasing design, the Blower Motor Resistor is a highly distinguishable unit of the automotive industry, further solidifying the Chrysler Aspen's status as a full-size luxury SUV that does not compromise aesthetics for utility.

Chrysler Aspen Blower Motor Resistor Parts and Q&A

Resistor, Front
5061575AA
Q: How to Install a Blower Motor Resistor in the Front HVAC Housing on Chrysler Aspen?
A:
Lay the blower motor resistor into the front unit of the vehicle's HVAC assembly. Secure the blower motor resistor on the front housing with two screws that you tighten to 2 Nm (17 in. lbs.). Link the wire harness connector to the blower motor resistor. If the trim cover is available, put it over the blower motor resistor and secure it with two screws, tightening them to 2 Nm (17 in. lbs.). Lastly, link the negative battery cable back to its position.
Blower Motor Resistor, Rear
5019639AA
Q: How to Safely Remove and Service a Blower Motor Resistor on Chrysler Aspen?
A:
For vehicles with air bags, first connect the negative battery cable to disconnect it and give the air bag system two minutes to discharge. Let the Blower Motor rest for at least five minutes so that the resistors in the motor can cool; they may become very hot when used. Don't remove the resistor and operate the blower motor, as it could damage the car. The first thing to do is disconnect and separate the negative battery cable. If there is a trim cover, inside the instrument panel, take out the screws that hold it in place over the blower motor resistor below the right side, then get rid of the cover. After that, take out the connection between the wire harness and the blower motor resistor. Open the front HVAC housing and then remove the two screws holding down the blower motor resistor. After that, lift out the blower motor resistor.