How to install the Crankshaft Position Sensor on the 4.7L engine on Chrysler Aspen?

To effectively install the Crankshaft Position Sensor on the 4.7L Engine, first, clear out the machined hole of the engine block. Using a slight rocking and twisting action, install the sensor into the engine block after applying a small amount of engine oil to the sensor O-ring. The CKP sensor mounting bolt must be tightened only when the sensor is completely flush to the cylinder block checked. Otherwise, the sensor mounting tang will be damaged. Using a torque of 28 Nm (21 ft. lbs.), tighten the mounting bolt and plug the electrical connector into the sensor. Finally, lower the vehicle.

How to remove and repair the Crankshaft Position Sensor on a 4.7L V-8 on Chrysler Aspen?

To repair and service the Crankshaft Position Sensor on the 4.7L V-8, first raise the car. The CKP electrical connector is disconnected at the sensor. The CKP mounting bolt 2 is removed. The sensor is twisted from the cylinder block and removed from the vehicle. Ultimately, verify the condition of the sensor O-ring.

OEM Chrysler Aspen Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
Chrysler Aspen Crankshaft Position Sensor Part Number: 5149230AA
$63.33 MSRP: $93.40
You Save: $30.07 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor Sensoe; Crankshaft Sensor; Sensor Crankshaft Position
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Crankshaft Position Sensor Part Number: 56028666AB
$183.55 MSRP: $271.00
You Save: $87.45 (33%)
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor Crankshaft Position
- Replaces: 56028666AA, 56028136AC, 56028136AD, 56028137AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Crankshaft Position Sensor Part Number: 5149009AD
$82.94 MSRP: $125.00
You Save: $42.06 (34%)
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 5149009AA, 5149009AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Aspen | Limited | 5.7L V8, 8 Cyl 5.7 L GAS

Chrysler Aspen Crankshaft Position Sensor

Choose OEM Crankshaft Position Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Crankshaft Position Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Aspen Crankshaft Position Sensor Parts and Q&A

Crankshaft Position Sensor
5149230AA
Q:
How to install the Crankshaft Position Sensor on the 4.7L engine on Chrysler Aspen?
A:
To effectively install the Crankshaft Position Sensor on the 4.7L Engine, first, clear out the machined hole of the engine block. Using a slight rocking and twisting action, install the sensor into the engine block after applying a small amount of engine oil to the sensor O-ring. The CKP sensor mounting bolt must be tightened only when the sensor is completely flush to the cylinder block checked. Otherwise, the sensor mounting tang will be damaged. Using a torque of 28 Nm (21 ft. lbs.), tighten the mounting bolt and plug the electrical connector into the sensor. Finally, lower the vehicle.
Crankshaft Position Sensor
56028666AB
Q:
How to remove and repair the Crankshaft Position Sensor on a 4.7L V-8 on Chrysler Aspen?
A:
To repair and service the Crankshaft Position Sensor on the 4.7L V-8, first raise the car. The CKP electrical connector is disconnected at the sensor. The CKP mounting bolt 2 is removed. The sensor is twisted from the cylinder block and removed from the vehicle. Ultimately, verify the condition of the sensor O-ring.