How to Install the Engine Control Module and Ensure It Is Properly Programmed to Prevent Diagnostic Trouble Codes on Chrysler Aspen?

Do not forget to remove the ABS CAB for a moment, since if you don't, the DTCs could be caused by the VIN license failing to transfer. With the engine on, verify Miscellaneous then Check VIN to ensure you have the hunt VIN checked and the risk level updated, then turn off the truck and restore the ABS module connection. Make sure to input the car's original VIN and mileage into the new PCM by using the scan tool which should help prevent a Diagnostic Trouble Code. Grip the board near its edge and place the PCM inside the vehicle. Use three bolts to attach the board, tightening them between 3 and 5 Nm (30 and 40 in. lbs.). Look at the pin connectors on the PCM and check each of the four 38-way connectors for damage or corrosion and fix or replace them if necessary before connecting them to the PCM. At this point, fit the air intake tube using four nuts, the wiper cowl support using three bolts, the wiper cowl with two screws and four pins and both wiper arms. Next, plug in the negative battery cable to finish the job and check that the PCM is updated with the initial VIN and mileage to prevent DTCs.

How to Replace the Engine Control Module on Chrysler Aspen?

Remove the negative battery cable and be sure the ignition key is turned off. Remove the ABS CAB for a short time if you experience issues with DTCs linked to the VIN broadcast. Following the PCM switch, use the scan tool to input the VIN to the new module by picking item 1 from the main menu. Check "Miscellaneous," "Check VIN" and make sure the VIN looks correct before turning off your car and reattaching the ABS connector. Take apart both wiper arms, unscrew the two screws and remove the four pins from the wiper cowl and remove three bolts from the wiper cowl support. Then, go ahead by releasing four nuts to get the air intake tube off and using care, unplug the four 38-way connectors from the PCM assembly. Now declare the PCM mounting bolts and take the PCM out of the vehicle. Always use the original VIN and mileage to reprogram the PCM with the scan tool to prevent code setting.

OEM Chrysler Aspen Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Engine Control Modules found

View related parts
Chrysler Aspen Transmission Controller Part Number: 5150283AB
$794.91 MSRP: $1195.00
You Save: $400.09 (34%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; Transmission Control Module; ECM; Module Powertrain Control Generic
- Replaces: RL150283AB, 5150283AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Aspen | Limited | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Transmission Controller Part Number: 5094355AF
$710.93 MSRP: $1080.00
You Save: $369.07 (35%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; Transmission Control Module; ECM
- Replaces: 5094355AC, 5094355AB, 5094355AD, RL094355AF, 5094355AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Aspen | Limited | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Transmission Controller Part Number: 5150281AB
$939.67 MSRP: $1430.00
You Save: $490.33 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; Transmission Control Module; ECM; Module Powertrain Control Generic
- Replaces: RL150281AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chrysler Aspen | Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Transmission Controller Part Number: RL094354AF
Product Specifications
- Other Name: Module - Powertrain Control; Transmission Control Module; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaced by: 5094354AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Control Module Part Number: 5094354AF
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: 5094354AD, 5094354AC, 5094354AE, RL094354AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Aspen | Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Control Module Part Number: 5150390AE
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Replaces: 5150390AA, 5150426AF, RL150390AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited | 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen ECM Part Number: RL150395AE
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaces: 5150395AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited, Limited Hybrid | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

Chrysler Aspen Engine Control Module

Choose OEM Engine Control Module that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Engine Control Module follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Another critical element in Chrysler Aspen cars is the Chrysler Aspen Engine Control Module or the ECM for short that will heighten the dependability and efficiency of Chrysler Aspen automobile. Located to act as the control center of the engine, the ECM is a master at controlling several aspects of the engine ranging from the air fuel mixture to ignition timing and idle speed to name but a few. This particular Engine Control Module is an upgraded one, which is capable of being easily programmed into the Chrysler Aspen models, the regular as well as the hybrid ones. The Chrysler Aspen's ECM is unique in the automotive industry since it can display real-time information and tailor the performance of the engine and this enhances the efficiency and safety thereof. Astonishingly, Chrysler Aspen is characterized with giant engine options being a 4.7L V8 and a powerful Hemi 5.7L V8; nevertheless, one cannot overlook the Engine Control Module since it optimizes horsepower/torque as well as fuel consumption. For instance, the Chrysler Aspen two-mode hybrid system in the tested car establishes the ECM proficiency in low speed electric mode efficiency boosters. The need to incorporate the aspect of luxury when designing the Chrysler Aspen Engine Control Module cannot be seen as a fluke or a mere marketing strategy because it is a representation of the company's vision of technological innovation in automobile technology. It becomes the key component within the Chrysler Aspen because of its dependability, output, and efficiency, which all contribute to the comfortable, powerful, and smooth driving characteristic of the car.

Chrysler Aspen Engine Control Module Parts and Q&A

Control Module
5094354AF
Q: How to Install the Engine Control Module and Ensure It Is Properly Programmed to Prevent Diagnostic Trouble Codes on Chrysler Aspen?
A:
Do not forget to remove the ABS CAB for a moment, since if you don't, the DTCs could be caused by the VIN license failing to transfer. With the engine on, verify Miscellaneous then Check VIN to ensure you have the hunt VIN checked and the risk level updated, then turn off the truck and restore the ABS module connection. Make sure to input the car's original VIN and mileage into the new PCM by using the scan tool which should help prevent a Diagnostic Trouble Code. Grip the board near its edge and place the PCM inside the vehicle. Use three bolts to attach the board, tightening them between 3 and 5 Nm (30 and 40 in. lbs.). Look at the pin connectors on the PCM and check each of the four 38-way connectors for damage or corrosion and fix or replace them if necessary before connecting them to the PCM. At this point, fit the air intake tube using four nuts, the wiper cowl support using three bolts, the wiper cowl with two screws and four pins and both Wiper Arms. Next, plug in the negative battery cable to finish the job and check that the PCM is updated with the initial VIN and mileage to prevent DTCs.
Transmission Controller
5094355AF
Q: How to Replace the Engine Control Module on Chrysler Aspen?
A:
Remove the negative battery cable and be sure the ignition key is turned off. Remove the ABS CAB for a short time if you experience issues with DTCs linked to the VIN broadcast. Following the PCM switch, use the scan tool to input the VIN to the new module by picking item 1 from the main menu. Check "Miscellaneous," "Check VIN" and make sure the VIN looks correct before turning off your car and reattaching the ABS connector. Take apart both Wiper Arms, unscrew the two screws and remove the four pins from the wiper cowl and remove three bolts from the wiper cowl support. Then, go ahead by releasing four nuts to get the air intake tube off and using care, unplug the four 38-way connectors from the PCM assembly. Now declare the PCM mounting bolts and take the PCM out of the vehicle. Always use the original VIN and mileage to reprogram the PCM with the scan tool to prevent code setting.