How to Correctly Install an Oxygen Sensor on Chrysler Aspen?

Be sure not to put any anti-seize compound on the threads of the new oxygen sensor, since they are coated that way already for easy replacement later. Start by attaching the O2S sensor and make sure it is tightened to 30 ft. lbs. (41 Nm). Following that, link the O2S sensor wire connector. If installing a 4-sensor system's right-upstream (2/1) sensor, complete the inner fender liner and right-front wheel installation before you lower the vehicle.

How to Maintain and Fix an Oxygen Sensor on Chrysler Aspen?

Be careful to start the service on your oxygen sensor when the engine has cooled, since the exhaust manifold, pipes and catalytic converter can get quite hot during operation. Start by elevating and holding up the car or truck first. When you're removing the right-upstream (2/1) sensor from a 4-sensor system, first remove the right-front tire/wheel and after that, take out the plastic inner fender liner inside the door. Open the wire connector from the O2S sensor and make sure not to tug the wire that is inside the sensor. You should remove the O2S using the sensor removal and installation tool and afterwards clear any dirt from the threads in the exhaust tubes with a suitable tap. Don't use grease or try to solder the sensor harness around the oxygen sensor electrical connector.

OEM Chrysler Aspen Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oxygen Sensors found

View related parts
Chrysler Aspen Oxygen Sensor, Front Part Number: 56029050AA
$77.38 MSRP: $114.00
You Save: $36.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chrysler Aspen Oxygen Sensor, Front Driver Side Part Number: 56028998AB
$94.67 MSRP: $141.00
You Save: $46.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Rear, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Oxygen Sensor, Front Driver Side Part Number: 56029049AA
$97.32 MSRP: $144.00
You Save: $46.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Oxygen Sensor, Rear Part Number: 56028999AB
$197.65 MSRP: $294.00
You Save: $96.35 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear, Rear Left; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

Chrysler Aspen Oxygen Sensor

Choose OEM Oxygen Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Oxygen Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Aspen Oxygen Sensor part is one of the essential items that increase the reliability and performance of Chrysler's luxury full-sized SUV. Measuring unburned oxygen content within the engine exhaust, the Oxygen Sensor is a major preventative measure responsible for proper air fuel ratio and therefore optimal fuel economy and reduced emissions. Chrysler aspen ranging from model of 2006 - 2008 commonly incorporates zirconium dioxide based oxygen Sensors that come in two categories, the narrow band oxygen sensor and the wide band oxygen sensor. Among sensor variants the wideband Oxygen Sensor is seen as special as it offers more potential air-fuel mixture measurements for optimal closed loop engine operation. This increases the efficiency of the Chrysler Aspen and at the same time improves the performance of the catalytic converter thus increasing the safety of vehicles. As the Oxygen Sensor can wear out due to contamination and the fact that it is compatible with multiple Aspen models, the vehicle's proper performance depends on it. The Oxygen Sensor is efficiency boosting feature of Chrysler Aspen since the car offers high towing capacity, has lot of leg space, and packs up quality engines such as the 5.7L Hemi V8. Furthermore, while the Aspen with the Two-Mode Hybrid system is highlighted as the new model of the series, the Oxygen Sensor is illustrated in its contribution to efficiency to use the fuel. In summary, Chrysler Oxygen Sensor in the Aspen models stands out in the area of auto-technology, further enhancing the company's pledge to customers on quality and improvement.

Chrysler Aspen Oxygen Sensor Parts and Q&A

Oxygen Sensor, Front Driver Side
56029049AA
Q: How to Correctly Install an Oxygen Sensor on Chrysler Aspen?
A:
Be sure not to put any anti-seize compound on the threads of the new oxygen sensor, since they are coated that way already for easy replacement later. Start by attaching the O2S sensor and make sure it is tightened to 30 ft. lbs. (41 Nm). Following that, link the O2S sensor wire connector. If installing a 4-sensor system's right-upstream (2/1) sensor, complete the inner fender liner and right-front wheel installation before you lower the vehicle.
Oxygen Sensor, Front
56029050AA
Q: How to Maintain and Fix an Oxygen Sensor on Chrysler Aspen?
A:
Be careful to start the service on your oxygen sensor when the engine has cooled, since the Exhaust Manifold, pipes and Catalytic Converter can get quite hot during operation. Start by elevating and holding up the car or truck first. When you're removing the right-upstream (2/1) sensor from a 4-sensor system, first remove the right-front tire/wheel and after that, take out the plastic inner fender liner inside the door. Open the wire connector from the O2S sensor and make sure not to tug the wire that is inside the sensor. You should remove the O2S using the sensor removal and installation tool and afterwards clear any dirt from the threads in the exhaust tubes with a suitable tap. Don't use grease or try to solder the sensor harness around the oxygen sensor electrical connector.