Should You Reface the Brake Disc with Every Brake Pad Replacement on Chrysler LHS?

Disc refacing is not a given whenever you change brake pads, but extreme care should be taken during servicing so the disc stays in the needed range. When the disc surface is very meaning, curved or if someone mentions problems with rough brakes or pedal vibration, refacing the disc with a wheel brake lathe or changing it with a new disc is the solution. If you want to reduce runout, use a brake lathe that fits onto the hub, as it trues the disc in place of the hub and bearing. Every disc will show the minimum thickness allowed, marked on its untouched side, showing the least amount the disc should be machined. The thickness of the disc at this point must not be machined below the recommended level. Before you install anything, check that both the brake disc face and hub adapters are clean, rust free and not contaminated. While brake lathe operation, strictly go by what the manufacturer advises and grind two sides together to avoid a slanted or rough disc cut. The TIR and thickness limits should always be maintained during refacing which means operators of disc turning equipment must pay close attention to their work.

How to Remove and Install Front and Rear Brake Discs on Chrysler LHS?

You should start with removing the disc brake caliper, hanging it down to provide space. Now, remove any clips bonding the brake disc to the wheel mounting studs and lift the rotation straight off the hub as well. For the rear brake disc, proceed as before by removing the caliper from the hub and suspending it, removing any clips and simply pulling the disc straight off. First, put the front brake disc over the wheel mounting studs attached to the hub. After that, fit back the disc brake caliper and the brake shoes. Go over the brakes by pressing the pedal several times and adjust the brake fluid level each time it is needed. Position the rear brake disc on the hub over the studs, reinstall the caliper and shoes, adjust the back brake shoes as you see fit, pump the brake pedal a few times to make sure it's firm and top up the brake fluid if needed.

OEM Chrysler LHS Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Discs found

View related parts
Chrysler LHS Rotor, Rear Part Number: 4779111AC
$46.03 MSRP: $83.35
You Save: $37.32 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake; Brake Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Rotor, Front Part Number: 4779133AC
$91.14 MSRP: $145.00
You Save: $53.86 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Replaces: 4779133AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Rotor, Front Part Number: 4779020AB
$37.29 MSRP: $54.85
You Save: $17.56 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Rotor, Front Part Number: 4755028
$25.52 MSRP: $32.36
You Save: $6.84 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Front Disc Brake Finish; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front Brake; Rotor Brake
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Rotor, Rear Part Number: 4779018
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake; Brake Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Rotor, Rear Part Number: 4582225
Product Specifications
- Other Name: Rotor - Rear Wheel Brake Finished; Brake Rotor; Rotor, Rear Disc Brake; Rotor Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Rotor, Front Part Number: 4779101AB
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Brake Rotor
- Position: Front
- Replaces: 4779101AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 3.5L V6, 6 Cyl 3.5 L GAS

Chrysler LHS Brake Disc

Choose OEM Brake Disc that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Brake Disc follows strict manufacturing steps to lock in quality and fit. If your Chrysler LHS matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine LHS parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler LHS brake disc and Chrysler LHS brake pad are important components for the LHS cars which would elaborate on the reliability of the Chrysler LHS cars and the factors of luxury and engineering behind the cars. This Brake Disc kit ensures the best performance braking system to improve safety and the satisfaction of the drivers. Specifically designed for the Chrysler LHS vehicles made from 1994 to 2001, the set contains brake discs and brake pads that provide the best performance. The brake pads, particularly the friction material, are manufactured to last long and work effectively due to strategic designs. Also, other related parts including the clips and shims that help in achieving even wearing and efficient working of the Brake Disc system may be included in the kit. specifically about the Chrysler Brake Disc, John stated that this product is most important to those who want or need a dependable car under regular use or under conditions like towing or spirited driving. Some of the improvements of the car are improved cooling of power units and noise reduction which makes the riding more comfortable. In totality, the Chrysler Brake Disc not only strengthens the braking system of the car but also has a significant role to play for Chrysler LHS to sustain it's the reputation of being safe and high performing car; hence, could be considered as one of the best choices LHS owners who always prefer quality and reliability of their vehicles.

Chrysler LHS Brake Disc Parts and Q&A

Rotor, Rear
4779111AC
Q: Should You Reface the Brake Disc with Every Brake Pad Replacement on Chrysler LHS?
A:
Disc refacing is not a given whenever you change Brake Pads, but extreme care should be taken during servicing so the disc stays in the needed range. When the disc surface is very meaning, curved or if someone mentions problems with rough brakes or pedal vibration, refacing the disc with a wheel brake lathe or changing it with a new disc is the solution. If you want to reduce runout, use a brake lathe that fits onto the hub, as it trues the disc in place of the hub and bearing. Every disc will show the minimum thickness allowed, marked on its untouched side, showing the least amount the disc should be machined. The thickness of the disc at this point must not be machined below the recommended level. Before you install anything, check that both the brake disc face and hub adapters are clean, rust free and not contaminated. While brake lathe operation, strictly go by what the manufacturer advises and grind two sides together to avoid a slanted or rough disc cut. The TIR and thickness limits should always be maintained during refacing which means operators of disc turning equipment must pay close attention to their work.
Rotor, Front
4779133AC
Q: How to Remove and Install Front and Rear Brake Discs on Chrysler LHS?
A:
You should start with removing the disc Brake Caliper, hanging it down to provide space. Now, remove any clips bonding the brake disc to the wheel mounting studs and lift the rotation straight off the hub as well. For the rear brake disc, proceed as before by removing the caliper from the hub and suspending it, removing any clips and simply pulling the disc straight off. First, put the front brake disc over the wheel mounting studs attached to the hub. After that, fit back the disc brake caliper and the brake shoes. Go over the brakes by pressing the pedal several times and adjust the brake fluid level each time it is needed. Position the rear brake disc on the hub over the studs, reinstall the caliper and shoes, adjust the back brake shoes as you see fit, pump the brake pedal a few times to make sure it's firm and top up the brake fluid if needed.