OEM Chrysler Pacifica Parking Brake Shoes

Chrysler Pacifica Parking Brake Shoes Parts and Q&A

• Parking Brake Shoes, Rear
  68020626AB
  Q:

  How to install Parking Brake Shoes on Chrysler Pacifica?

  A:

  First, place the return spring in between the upper and lower parking brake shoes when fitting the shoes. Be sure to face the word "UP" from the actuator toward the rear before putting on the upper and lower shoes. Then, insert the lower brake shoe hold-down pin into the back of the support and lower shoe and put on the hold-down clip. Do the same for the top shoe: put the hold-down pin through the rear of the support and shoe and attach it with another hold-down clip. Fit the end of the shoe adjuster onto the arm that holds the star wheel and anchor the parking brake shoe adjuster spring to the arm afterwards. Take bolt and attach the Parking Brake Cable to the knuckle of the rack by tightening it to 28 Nm (21 ft. lbs.). Take off the parking brake drum and place the Brake Shoe Gauge, Special Tool C-3919 or equivalent measuring device, over the shoes at the widest point to find the inside diameter. With the adjuster star wheel, make the parking brake linings match the jaws on gauge for a first adjustment. Until the vehicle is lowered, install the hub, bearing, wheel speed sensor and all necessary pieces. Turn the automatic adjuster in the parking brake lever, then perform the last adjustment of the parking brake shoes.