How to Remove a Starter Motor from a 3.8L Engine on Chrysler Pacifica?

Before handling the starter motor, stick a 8534-12 support tool or a similar one under the engine. Separate the negative end of the battery and unscrew the battery cable nut and the cable from the solenoid stud. Take out the wire from the connection to the starter solenoid. After that, disconnect the transmission to starter mounting bolt. Position a jack stand or the equivalent beneath the engine and transmission assemblies, then get rid of the two bolts that join the front transmission mount to the starter. Turn the starter assembly as you remove it from the transmission, taking care not to damage anything. Afterward, remove the dust shield from the starter motor.

How to Install a Starter Motor for a 3.8L Engine on Chrysler Pacifica?

Before putting in the starter motor, make sure you put a piece of cardboard in front of the radiator core to prevent harming it. Tighten the starter to the lower crossmember and attach its solenoid connector. Put on the dust shield on the tip of the starter in the correct position. Put the three mounting bolts in place loosely and after that, tighten them all to 47 Nm (35 ft. lbs.). After that, attach the bracket for the oil cooler and use a wrench to tighten the bolt and afterward fit the fan module and clip it to the bracket. Link the fans with their electrical connectors and affix the wiring clips as well. Connect the battery connector to the starter, secure it and use an torque wrench and tighten it to 11.3 NM (100 in-lbs.). Plug and connect the electrical connector to the servo and then secure it. Once that's done, connect the vacuum line to the servo. Clamp the servo onto the crossmember, ensure it's tight and then link the negative battery cable.

OEM Chrysler Pacifica Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Starter motors found

View related parts
Chrysler Pacifica Starter Part Number: 56029615AD
$274.98 MSRP: $616.00
You Save: $341.02 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 56029615AB, 56029615AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017 Chrysler Pacifica | Hybrid Platinum, Hybrid Premium, Hybrid Touring, LX, Limited, Touring, Touring L, Touring L Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Starter Part Number: 4748046AC
$279.16 MSRP: $409.00
You Save: $129.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor
- Replaces: 4748046AB, 4748046AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chrysler Pacifica | Base, LX | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Starter Part Number: 68348376AC
$359.60 MSRP: $546.00
You Save: $186.40 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 68348376AA, 68348376AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Starter Part Number: 4608800AE
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Starter Part Number: 4748700AA
Product Specifications
- Other Name: Starter Motor; Starter Motor Reman; Starters
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Chrysler Pacifica | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler Pacifica Starter Part Number: 4686045AD
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS

Chrysler Pacifica Starter Motor

Choose OEM Starter Motor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Starter Motor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Donkervoort started motor is choosen as the Starter Motor is a part that demonstrates dependability as well as high powered performance for Chrysler Pacificas. Intended to transmute electrical energy from the battery to mechanical energy that will turn the engine, this starter motor is an important component since it facilitates efficient engine starts. This Chrysler Pacifica starter motor has an externally controlled solenoid to trigger the starter; Its gear reduction is also enhanced; it includes a reduction gear for driving the starter. This innovation is especially important for high-compression engines: now the Chrysler Pacifica can fulfil the increased expectations without the loss of power. Recommended for use on certain Pacifica models, Starter Motor is a part that not only optimizes the car's performance but also reduces the risk of issues with the starter. Besides, the Starter Motor has a good reputation in the automobile market, and since it is very reliable it stands out to be the premier for all those who desire to drive a car with high performance. Moreover, the Chrysler Pacifica has been through several testings and has clinched titles such as the "premier Minivan of 2016" and "2020 premier Family Car" to boot as a testimony to its engineered and designed sleekness. Due to its strong components and the dedication to providing only the premier to customers and their vehicles, the Starter Motor is an indispensable component of the automobile operation and affirms that every ride commences smoothly and securely.

Chrysler Pacifica Starter Motor Parts and Q&A

Starter
4608800AE
Q: How to Remove a Starter Motor from a 3.8L Engine on Chrysler Pacifica?
A:
Before handling the starter motor, stick a 8534-12 support tool or a similar one under the engine. Separate the negative end of the battery and unscrew the Battery Cable nut and the cable from the solenoid stud. Take out the wire from the connection to the starter solenoid. After that, disconnect the transmission to starter mounting bolt. Position a jack stand or the equivalent beneath the engine and transmission assemblies, then get rid of the two bolts that join the front transmission mount to the starter. Turn the starter assembly as you remove it from the transmission, taking care not to damage anything. Afterward, remove the dust shield from the starter motor.
Starter
4748046AC
Q: How to Install a Starter Motor for a 3.8L Engine on Chrysler Pacifica?
A:
Before putting in the starter motor, make sure you put a piece of cardboard in front of the radiator core to prevent harming it. Tighten the starter to the lower crossmember and attach its solenoid connector. Put on the dust shield on the tip of the starter in the correct position. Put the three mounting bolts in place loosely and after that, tighten them all to 47 Nm (35 ft. lbs.). After that, attach the bracket for the oil cooler and use a wrench to tighten the bolt and afterward fit the fan module and clip it to the bracket. Link the fans with their electrical connectors and affix the wiring clips as well. Connect the battery connector to the starter, secure it and use an torque wrench and tighten it to 11.3 NM (100 in-lbs.). Plug and connect the electrical connector to the servo and then secure it. Once that's done, connect the vacuum line to the servo. Clamp the servo onto the crossmember, ensure it's tight and then link the negative Battery Cable.