How to Service an Air Bag Control Module on Chrysler PT Cruiser?

Before servicing the Air Bag Control Module, disconnect the negative battery cable and open the hood. Allow a reserve capacitor in your air bag system two more minutes to discharge before entering the car to avoid accidental air bag sending that could be dangerous. After that, take out the center console and remove the screws holding the Occupant Restraint Controller (ORC) in place. Detach the C1 and C2 ORC 32-way connectors, as shown in the diagnostic instructions and wire diagram and take the ORC out of the vehicle.

How to install an Air Bag Control Module on Chrysler PT Cruiser?

Attach the two connectors labeled C1 and C2 on the module and lock all the tab handles to install the Air Bag Control Module. After this, set the ORC with the arrow leading ahead in the mounting bracket, secure the passenger side's front ground eyelet screw and tighten all screws to 10.5 Nm (95 in. lbs.). Then, place the center console assembly into position. It's important to wait until the system test is done before you connect the negative terminal of the battery to avoid risk of injury or death.

OEM Chrysler PT Cruiser Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Air Bag Control Modules found

View related parts
Chrysler PT Cruiser Control Module Part Number: 5084006AK
$190.91 MSRP: $289.00
You Save: $98.09 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Occupant Classification; Seat Heater Control Module; Module; Module Occupant Classification
- Replaces: 5084006AJ, 5084006AE, 5084006AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Control Module Part Number: 4714681AG
$172.13 MSRP: $225.00
You Save: $52.87 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; SDM Module; Module Occupant Restraint
- Replaces: 4714681AD, 4714681AE, 4714681AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Control Module Part Number: 4671419AF
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; SDM Module; Module Air Bag Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler PT Cruiser | Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Control Module Part Number: 4714685AF
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; SDM Module; Module Occupant Restraint
- Replaces: 4714685AD, 4714685AC, 4714685AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chrysler PT Cruiser | Base, GT, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Control Module Part Number: 4714684AF
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; SDM Module; Module Occupant Restraint
- Replaces: 4714684AD, 4714684AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chrysler PT Cruiser | Base, GT, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser SDM Module Part Number: 4714680AG
Product Specifications
- Other Name: Module - Occupant Restraint; Occupant Module; Module Occupant Restraint
- Replaces: 4714680AD, 4714680AF, 4714680AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Control Module Part Number: 4671419AE
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; SDM Module
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler PT Cruiser | Base, Dream, GT, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Control Module Part Number: 4896523AC
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module
- Replaces: 4896523AA, 4896523AB, 5084055AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chrysler PT Cruiser | GT, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser SDM Module Part Number: 4896520AC
Product Specifications
- Other Name: Module - Air Bag Control
- Replaces: 4896520AB, 4671776AF, 4671776AD, 4671776AE, 4896520AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler PT Cruiser | Base, GT, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

Chrysler PT Cruiser Air Bag Control Module

Choose OEM Air Bag Control Module that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Air Bag Control Module follows strict manufacturing steps to lock in quality and fit. If your Chrysler PT Cruiser matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine PT Cruiser parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Air Bag Control Module present within Chrysler PT Cruiser models represents a vital component which operates at high reliability and performance levels in the supplementary restraint system. The module operates as a responsible component which checks collision sensors to determine impact severity while initiating prompt airbag deployment during critical collisions to protect vehicle passengers. The Chrysler PT Cruiser Air Bag Control Module stores vital crash data together with diagnostic content which stands essential for post-accident examinations. This Air Bag Control Module works with an extensive range of PT Cruiser vehicle versions and continues to adapt to higher safety requirements without affecting basic operational features. Chrysler PT Cruiser owners trust this product because the diagnostic testing capability during startup demonstrates its reliable performance. The Chrysler PT Cruiser gained its fame from its 1930s-inspired design along with practical elements such as its tall roof and detachable rear seats among advanced safety functions from the Air Bag Control Module. The Chrysler PT Cruiser maintains competitive market position through its safety architecture integration features found in the Air Bag Control Module. The Chrysler model Air Bag Control Module establishes itself as the essential component behind the vehicle's reliability because it combines performance and safety elements.

Chrysler PT Cruiser Air Bag Control Module Parts and Q&A

Control Module
5084006AK
Q: How to Service an Air Bag Control Module on Chrysler PT Cruiser?
A:
Before servicing the Air Bag Control Module, disconnect the negative Battery Cable and open the hood. Allow a reserve capacitor in your air bag system two more minutes to discharge before entering the car to avoid accidental air bag sending that could be dangerous. After that, take out the center console and remove the screws holding the Occupant Restraint Controller (ORC) in place. Detach the C1 and C2 ORC 32-way connectors, as shown in the diagnostic instructions and wire diagram and take the ORC out of the vehicle.
Control Module
4714681AG
Q: How to install an Air Bag Control Module on Chrysler PT Cruiser?
A:
Attach the two connectors labeled C1 and C2 on the module and lock all the tab handles to install the Air Bag Control Module. After this, set the ORC with the arrow leading ahead in the mounting bracket, secure the passenger side's front ground eyelet screw and tighten all screws to 10.5 Nm (95 in. lbs.). Then, place the center console assembly into position. It's important to wait until the system test is done before you connect the negative terminal of the battery to avoid risk of injury or death.