How to Maintain an Evaporator for Optimal Performance on Chrysler Sebring?

Before caring for the A/C evaporator, disconnect the negative battery cable. Get rid of the housing that surrounds your HVAC unit. Unplug the connector from the recirculation motor and take off the wiring harness connector sitting on top of the housing. Following that, separate the seal at the evaporator coil inlet/outlet and take out the top screw which secures the housing. Take out the upper housing of the refrigerator and remove the evaporator temperature sensor from there. Lift the evaporator from the bottom housing and take out the styrofoam around it. For installation, first put the evaporator coil into the housing and then set up the evaporator sensor. Attach the two housings with screws. Attach the recirculation motor connector, insert the evaporator seal and afterwards, connect the HVAC harness to the front upper housing. After finishing everything, put the HVAC housing back in the car.

How to Service and Repair an Evaporator on Chrysler Sebring?

You should first remove the evaporator enclosure and undo it as is required to reveal the A/C evaporator. Following this, take out the evaporator temperature sensor probe from the A/C evaporator and lift the evaporator and insulator from within the bottom part of the housing. If this part of the seal seems damaged or deformed, it should be replaced. During A/C evaporator replacement, insert 60 milliliters (2 fluid ounces) of oil according to the type indicated in the A/C compressor specifications in the vehicle. Set up the A/C evaporator low in the HVAC housing and confirm that the drain there is unobstructed and clear. Slide the evaporator temperature sensor probe through the highest hole in the A/C evaporator and position and install the housing.

OEM Chrysler Sebring Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Evaporators found

View related parts
Chrysler Sebring Evaporator Core Part Number: 5191346AB
$320.45 MSRP: $489.00
You Save: $168.55 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporatr - A/C; A/C Evaporator Core; Evaporator
- Replaces: 5191346AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Evaporator Core Part Number: 68234946AA
Product Specifications
- Other Name: Evaporato - A/C; A/C Evaporator Core; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator
- Replaces: 5093469AD, 5093469AE, V9900109AB, 5093469AB, 5093469AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Evaporator Core Part Number: MR500465
Product Specifications
- Other Name: Evaporato - A/C; A/C Evaporator Core; Evaporator; Evaporator A/C
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Evaporator Core Part Number: 5018751AC
Product Specifications
- Other Name: Evaporato - A/C; A/C Evaporator Core; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator
- Replaces: V9900005AB, 5018751AA, V9900005
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Sebring | GTC, LX, LXi, Limited | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Evaporator Core Part Number: 5013064AD
Product Specifications
- Other Name: Evaporato - A/C; Case Assembly; Evaporator
- Replaces: 5013064AB, V9900004AB, 5013064AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 2.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Case Assembly Part Number: 5013064AA
Product Specifications
- Other Name: Evaporato - A/C; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator; Evaporator A/C
- Replaced by: 5013064AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1998 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Evaporator Core Part Number: MR206121AC
Product Specifications
- Other Name: Evaporato - A/C; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator
- Replaces: MR206121, V9900010AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Sebring | LX, LXi | 2.0L L4, 2.5L V6, 6 Cyl 2.5 L GAS

Chrysler Sebring Evaporator

Choose OEM Evaporator that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Evaporator follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Although you may not frequently hear of the Chrysler Sebring Evaporator, it is a significant element in the Chrysler Sebring selection due to the consistent ability to deliver high-quality operation for managing the temperatures within the car's interior. Positioned below the dashboard, this evaporator is efficiently involved in cooling the air, mainly through heat absorption, in order to increase the productivity and security of the vehicle. Similar to the Chrysler Sebring Condenser, when warm air flows over the aluminum fins of the Chrysler Sebring Evaporator, the environment's refrigerant turns from liquid to vapor and cools and dehumidifies cabin air. Ideal for a number of Chrysler Sebring car models, this evaporator is built to last and built to provide to passengers a comfortable ride regardless of what weather condition it may be outside the car. The design of the Chrysler Sebring Evaporator comprises of tubes arrangements and fins model and its construction is made in a special way, different from other evaporators in the automobile market. Someday it might have rust, leakage, or clogs and if it is like that, then the evaporator needs to be replaced. In addition to shedding light on the issue of safety and the efficient functioning of the car's evaporator to eliminate the accumulation of moisture or development of any bad smells. The technological design made it an important part on the Chrysler Sebring Evaporator; thus, the Chrysler Sebring continues to be a preferred vehicle by drivers looking for dependable and comfortable automobiles.

Chrysler Sebring Evaporator Parts and Q&A

Evaporator Core
5018751AC
Q: How to Maintain an Evaporator for Optimal Performance on Chrysler Sebring?
A:
Before caring for the A/C evaporator, disconnect the negative Battery Cable. Get rid of the housing that surrounds your HVAC unit. Unplug the connector from the recirculation motor and take off the wiring harness connector sitting on top of the housing. Following that, separate the seal at the evaporator coil inlet/outlet and take out the top screw which secures the housing. Take out the upper housing of the refrigerator and remove the evaporator temperature sensor from there. Lift the evaporator from the bottom housing and take out the styrofoam around it. For installation, first put the evaporator coil into the housing and then set up the evaporator sensor. Attach the two housings with screws. Attach the recirculation motor connector, insert the evaporator seal and afterwards, connect the HVAC harness to the front upper housing. After finishing everything, put the HVAC housing back in the car.
Evaporator Core
68234946AA
Q: How to Service and Repair an Evaporator on Chrysler Sebring?
A:
You should first remove the evaporator enclosure and undo it as is required to reveal the A/C evaporator. Following this, take out the evaporator temperature sensor probe from the A/C evaporator and lift the evaporator and insulator from within the bottom part of the housing. If this part of the seal seems damaged or deformed, it should be replaced. During A/C evaporator replacement, insert 60 milliliters (2 fluid ounces) of oil according to the type indicated in the A/C compressor specifications in the vehicle. Set up the A/C evaporator low in the HVAC housing and confirm that the drain there is unobstructed and clear. Slide the evaporator temperature sensor probe through the highest hole in the A/C evaporator and position and install the housing.