How to Install a Yaw Sensor on Chrysler Sebring?

To fit the yaw rate sensor, set it over the studs attached to the floor pan tunnel and fasten it with the two mounting nuts. Tighten the nuts to 9 Nm (80 in. lbs.). After that, attach the wiring harness connector to the dynamics sensor. After you have finished, set the center console in place and connect the negative side of the battery cable to the battery post. After that, conduct the Verification Test to address any discovered problems.

How to Service a Yaw Sensor on Chrysler Sebring?

You should start the service of the yaw rate sensor by unhooking the negative cable from the battery post and isolating it. From there, remove the center console. Then, get rid of the wiring from the dynamics sensor. Next, remove the nuts holding the dynamics sensor to the floor pan tunnel and at last, remove the dynamics sensor.

OEM Chrysler Sebring Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Yaw Sensors found

View related parts
Chrysler Sebring Yaw Rate Sensor Part Number: 5033322AC
Product Specifications
- Other Name: Module - Electronic Stability; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Sebring | LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Yaw Rate Sensor Part Number: 56029483AA
Product Specifications
- Other Name: Module - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Lateral Accelerometer Sensor; Electronic Stability Module.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Chrysler Sebring Yaw Sensor

Choose OEM Yaw Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Yaw Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A Yaw Sensor of the Chrysler Sebring operates as an essential element that boosts Chrysler mid-size automobile reliability together with performance output. The Yaw Sensor was created to track vertical axis rotational movements of vehicles in order to gather key stability control data for improved performance. Vehicle control especially in adverse conditions including rain becomes better because the Yaw Sensor ensures the Chrysler Sebring reacts properly to driver commands. The Yaw Sensor functions with multiple Sebring versions made between 1995 and 2010 and serves as a vital safety component which helped attain a 5-star frontal safety rating. The automotive market respects the Chrysler Sebring Yaw Sensor because its exceptional precision together with reliability benefits both driving efficiency and road safety. Drivers who seek security together with performance recognition the sensor as their preferred choice because it operates smoothly with the Sebring's modern design and technology components. The Chrysler car Yaw Sensor exhibits brand-driven quality and innovation by providing stability control and it represents an essential component for model vehicle owners who want to optimize their driving performance.

Chrysler Sebring Yaw Sensor Parts and Q&A

Yaw Rate Sensor
5033322AC
Q: How to Install a Yaw Sensor on Chrysler Sebring?
A:
To fit the yaw rate sensor, set it over the studs attached to the floor pan tunnel and fasten it with the two mounting nuts. Tighten the nuts to 9 Nm (80 in. lbs.). After that, attach the wiring harness connector to the dynamics sensor. After you have finished, set the center console in place and connect the negative side of the Battery Cable to the battery post. After that, conduct the Verification Test to address any discovered problems.
Yaw Rate Sensor
56029483AA
Q: How to Service a Yaw Sensor on Chrysler Sebring?
A:
You should start the service of the yaw rate sensor by unhooking the negative cable from the battery post and isolating it. From there, remove the center console. Then, get rid of the wiring from the dynamics sensor. Next, remove the nuts holding the dynamics sensor to the floor pan tunnel and at last, remove the dynamics sensor.