How to Service and Repair a Throttle Body on Chrysler Town & Country?

Remove the negative cable from the battery before working on the throttle body. Begin by unfastening the inlet hose clamp to the throttle body and afterward pull the throttle and speed control cables away from the lever arm. Unplug each electrical connector from the motor and the sensor for the idle air control and throttle position. After that, pry out the throttle body by undoing the connecting bolts and remove the gasket. Install a new gasket, fit the throttle body and tighten all the bolts to 28.2 N.m (250 ± 50 in. lbs.) for the 2.4L and 11.6 N.m (105 ± 20 in. lbs.) for the 3. Next, connect the electrical harnesses from the idle air control motor and the TPS to their respective points and install and tighten the TPS air inlet hose clamp. After finishing, reconnect the negative cable to the battery.

How to Install a Throttle Body on a 4.0L Engine on Chrysler Town & Country?

Make certain that the gasket on the intake manifold for a 4.0L engine is free from debris, clean and undamaged. Change it if it looks damaged. Don't apply too much torque, since it might cause harm to the throttle body, gaskets, bolts or intake manifold. Set the throttle body, gasket and bolt onto the intake manifold using the required sequence. Tighten the bolts to a torque of 5.5 Nm (50 in. lbs.). Next, attach the electrical connector to the throttle body, put in the clean air hose and lastly, place on the engine cover. Link the negative battery terminal cable and tighten it using the nut to 5 Nm (45 in. lbs.). After that, use a scan tool to activate the Etc Relearn feature.

OEM Chrysler Town & Country Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Throttle Bodies found

View related parts
Chrysler Town & Country Throttle Body Part Number: 4861691AA
$292.31 MSRP: $430.00
You Save: $137.69 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.
- Replaces: 4861694AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, Touring, Touring Plus | 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Throttle Body Part Number: 4593858AB
$665.21 MSRP: $1005.00
You Save: $339.79 (34%)
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.
- Replaces: 4593858AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | LX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Throttle Body Part Number: 5184349AF
$435.37 MSRP: $662.00
You Save: $226.63 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly; Electronic Throttle Body Module
- Replaces: 5184349AE, 5184349AC, 5184349AD, 5184349AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Throttle Body Part Number: 5283222
$269.65 MSRP: $397.00
You Save: $127.35 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Throttle - Body - Assembly; Body, Throttle
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1992 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Throttle Body Part Number: 5104746AA
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Chrysler Town & Country | EX, LX, Limited, Touring | 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Throttle Body Part Number: 5104745AA
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Chrysler Town & Country | Base, LX, Limited, Touring | 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Throttle Body Part Number: 4861254AD
Product Specifications
- Replaces: 4861254AB, 4861254AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited | 3.3L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Throttle Body Part Number: 4861256AD
Product Specifications
- Replaces: 4861256AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Town & Country | EL, EX, LX, LXi, Limited | 3.8L V6, 6 Cyl 3.8 L GAS

Chrysler Town & Country Throttle Body

Choose OEM Throttle Body that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Throttle Body follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Throttle Body in the Chrysler Town & Country vehicles involves the control of air flow to the engine within the fuel injection system available in automobiles. Situated in between the air cleaner and the intake manifold it includes a butterfly valve that controls the differential in proportion to the accelerator pedal command. When the pedal is pressed the valve opens thereby admitting more air and at the same time the sensors relay signals to the PCM for increase in fuel supply. Previous Throttle Body injection (TBI) has now evolved to multi port fuel injection which relocates fuel injection away from the throttle body in Chrysler Town & Country models. Modifications in the current generation vehicles incorporate the Electronic Throttle Control that affords safety and performance free from mechanical connections. Although they are considered to be quite durable and dependable, several Chrysler Town & Country throttle bodies could experience some form of build up or wear out, hence requiring servicing to achieve the optimal results out of the car's engine.

Chrysler Town & Country Throttle Body Parts and Q&A

Throttle Body
5104746AA
Q: How to Service and Repair a Throttle Body on Chrysler Town & Country?
A:
Remove the negative cable from the battery before working on the throttle body. Begin by unfastening the inlet hose clamp to the throttle body and afterward pull the throttle and speed control cables away from the lever arm. Unplug each electrical connector from the motor and the sensor for the idle air control and throttle position. After that, pry out the throttle body by undoing the connecting bolts and remove the gasket. Install a new gasket, fit the throttle body and tighten all the bolts to 28.2 N.m (250 ± 50 in. lbs.) for the 2.4L and 11.6 N.m (105 ± 20 in. lbs.) for the 3. Next, connect the electrical harnesses from the idle air control motor and the TPS to their respective points and install and tighten the TPS air inlet hose clamp. After finishing, reconnect the negative cable to the battery.
Throttle Body
4593858AB
Q: How to Install a Throttle Body on a 4.0L Engine on Chrysler Town & Country?
A:
Make certain that the gasket on the Intake Manifold for a 4.0L engine is free from debris, clean and undamaged. Change it if it looks damaged. Don't apply too much torque, since it might cause harm to the throttle body, gaskets, bolts or intake manifold. Set the throttle body, gasket and bolt onto the intake manifold using the required sequence. Tighten the bolts to a torque of 5.5 Nm (50 in. lbs.). Next, attach the electrical connector to the throttle body, put in the clean air hose and lastly, place on the engine cover. Link the negative battery terminal cable and tighten it using the nut to 5 Nm (45 in. lbs.). After that, use a scan tool to activate the Etc Relearn feature.